240v Power Meter
Model: 1K240-1SW| UPC: 078477597453
Model: 1K240-1SW
Series 1000 Indoor Enclosure Kit includes submeter and required current transformers (CTs). Features 120/208 Volt 1PH, 3W or 120/240 Volt, 1PH, 3W (Split Phase) with Steel Enclosure. Indoor 120/240V Single Phase kWh Meter Kit, 100A, 2 Solid Core CTs.
Series 1000 Indoor Enclosure Kit includes submeter and required current transformers (CTs). Features 120/208 Volt 1PH, 3W or 120/240 Volt, 1PH, 3W (Split Phase) with Steel Enclosure. Indoor 120/240V Single Phase kWh Meter Kit, 100A, 2 Solid Core CTs.
Leviton 1000 Series Offers
The Leviton VerifEye Series 1000 line of revenue-grade meters meets all measurement and verification-based opportunities — including load managementand LEED rating achievement. Designed to provide a simple and effective process for accurately capturing measurements of power consumption, Series 1000 Meters are easy to specify and install for new construction and retrofits.
Leviton meters utilize highly accurate current transformers (CTs) for revenue-grade performance certified to ANSI standards.Competing products use current sensors that do not provide the same level of performance. Leviton offers CTs in solid and split core styles to accommodate all phases of installation and construction.
Solid core CTs are ideal for new construction, when power is not live and wires can easily be threaded through the core. Split core CTs can be installed at any time without having to disconnect wire terminations, making them the optimal choice for retrofitting an existing structure. Split core CTs closesecurely for fast, precise installation with no need for time-consuming tie wraps and no worries about improper seating or core half separation. Both solid and split core CTs offer high quality, long term accuracy and reliability. Leviton solid core CTs are cost effective and less susceptible to damage during installation. Solid core CTs slip over power lines to measure the electrical current flowing through the line. The CT "secondary" wires connect to the meter facilitating power and energy calculations. They are compact and cost effective. Solid core CTs are accurate (0.3% maximum error). For installation, power must be de-energized and the circuit opened in order to slip the CT over the power line.
Split core CTs close securely for fast, precise installation with no need for time-consuming tie wraps and no worries about improper seating or core half separation. Both solid and split core CTs offer high quality, long term accuracy and reliability. Split core CTs can be disassembled or 'split' intohalves eliminating the need to turn power off and open the circuit during installation. This time-saving installation is ideal for critical loads that cannot be disconnected. Split core CTs close securely for fast, precise installation with no need for time-consuming tie wraps and no worries about improper seating or core half separation.
Every Series 1000 Meter has an installer friendly feedback feature. The red reverse phase indicator acts as an installation diagnostics tool and illuminates if a meter is improperly installed. After installation, the green duty cycle light shows that the meter is collecting the electrical consumption data at the appropriate rate. All 100 and 200 Amp solid core CTs have color-coded labels to easily identify and correctly land the wires at the meter.
Features
- Measures kWh and demand (optional)
- Conforms to all applicable standards of ANSI C12.1
- Reverse energy LED indicator helps ensure proper installation
- Equipped with an Isolated Pulse Output channel
- Utilizes revenue-grade 0.3% accuracy class 0.1A secondary solid core CTs that conform to all applicable ANSI requirements or 1.0% accuracy split-core CTs (CT's sold separatley)
- Up to three sets of CTs per phase can be paralleled per meter without the need for a meter multiplier
- Enclosures include surface mount industrial grade JIC steel indoor and NEMA 4X outdoor
- Interfaces with numerous communication systems – Hardwired Automatic Meter Reading (AMR) or wireless AMR
- Large LCD display shows kWh and instantaneous and peak demand (optionally) with manual keyed reset
- Load Indicator LED verifies meter functionality
- Reverse Phase Indicator LED illuminates if the meter is improperly installed
- UL/cUL Listed for UL 916 Energy Monitoring Equipment
- Ten year warranty
Applications
Ideal for the following applications: Load Profiling and Benchmarking, Usage Aggregation, Tenant Cost Allocation, Measurement and Verification, Energy Conservation and Cost Reduction, Green Building Initiatives and Government Mandates
Leviton 1K240-1SW Specifications
| Voltage | 120/208V 1 PH 3 W or 120/240V 1 PH 2 W (Split Phase) |
| Amps | 100 |
| CTs Included | 2 Solid CTs |
What's included with the Leviton 1K240-1SW
Customer Reviews for the Leviton 1K240-1SW
Ask a question about Leviton 1K240-1SW Indoor 120/240V Single Phase kWh Meter Kit, 100A, 2 Solid Core CTs
Leviton 1000 Series Offers
The Leviton VerifEye Series 1000 line of revenue-grade meters meets all measurement and verification-based opportunities — including load managementand LEED rating achievement. Designed to provide a simple and effective process for accurately capturing measurements of power consumption, Series 1000 Meters are easy to specify and install for new construction and retrofits.
Leviton meters utilize highly accurate current transformers (CTs) for revenue-grade performance certified to ANSI standards.Competing products use current sensors that do not provide the same level of performance. Leviton offers CTs in solid and split core styles to accommodate all phases of installation and construction.
Solid core CTs are ideal for new construction, when power is not live and wires can easily be threaded through the core. Split core CTs can be installed at any time without having to disconnect wire terminations, making them the optimal choice for retrofitting an existing structure. Split core CTs closesecurely for fast, precise installation with no need for time-consuming tie wraps and no worries about improper seating or core half separation. Both solid and split core CTs offer high quality, long term accuracy and reliability. Leviton solid core CTs are cost effective and less susceptible to damage during installation. Solid core CTs slip over power lines to measure the electrical current flowing through the line. The CT "secondary" wires connect to the meter facilitating power and energy calculations. They are compact and cost effective. Solid core CTs are accurate (0.3% maximum error). For installation, power must be de-energized and the circuit opened in order to slip the CT over the power line.
Split core CTs close securely for fast, precise installation with no need for time-consuming tie wraps and no worries about improper seating or core half separation. Both solid and split core CTs offer high quality, long term accuracy and reliability. Split core CTs can be disassembled or 'split' intohalves eliminating the need to turn power off and open the circuit during installation. This time-saving installation is ideal for critical loads that cannot be disconnected. Split core CTs close securely for fast, precise installation with no need for time-consuming tie wraps and no worries about improper seating or core half separation.
Every Series 1000 Meter has an installer friendly feedback feature. The red reverse phase indicator acts as an installation diagnostics tool and illuminates if a meter is improperly installed. After installation, the green duty cycle light shows that the meter is collecting the electrical consumption data at the appropriate rate. All 100 and 200 Amp solid core CTs have color-coded labels to easily identify and correctly land the wires at the meter.
Features
- Measures kWh and demand (optional)
- Conforms to all applicable standards of ANSI C12.1
- Reverse energy LED indicator helps ensure proper installation
- Equipped with an Isolated Pulse Output channel
- Utilizes revenue-grade 0.3% accuracy class 0.1A secondary solid core CTs that conform to all applicable ANSI requirements or 1.0% accuracy split-core CTs (CT's sold separatley)
- Up to three sets of CTs per phase can be paralleled per meter without the need for a meter multiplier
- Enclosures include surface mount industrial grade JIC steel indoor and NEMA 4X outdoor
- Interfaces with numerous communication systems – Hardwired Automatic Meter Reading (AMR) or wireless AMR
- Large LCD display shows kWh and instantaneous and peak demand (optionally) with manual keyed reset
- Load Indicator LED verifies meter functionality
- Reverse Phase Indicator LED illuminates if the meter is improperly installed
- UL/cUL Listed for UL 916 Energy Monitoring Equipment
- Ten year warranty
Applications
Ideal for the following applications: Load Profiling and Benchmarking, Usage Aggregation, Tenant Cost Allocation, Measurement and Verification, Energy Conservation and Cost Reduction, Green Building Initiatives and Government Mandates
Leviton 1K240-1SW Specifications
| Voltage | 120/208V 1 PH 3 W or 120/240V 1 PH 2 W (Split Phase) |
| Amps | 100 |
| CTs Included | 2 Solid CTs |
What's included with the Leviton 1K240-1SW
Ask a question about Leviton 1K240-1SW Indoor 120/240V Single Phase kWh Meter Kit, 100A, 2 Solid Core CTs
Customer Reviews for the Leviton 1K240-1SW
Request for Quote
To request an official quote for the Leviton 1K240-1SW please include your quantities and contact details.
* Required Fields
This website can’t process Canadian pricing.
Don’t worry, we can switch everything over to our Canadian affiliate.
Your quote cannot be processed with as the country.
Be the first to know when we have news, discounts, special offers and promotions.
*We don’t share your email. You can unsubscribe at any time.
Receive updates on when this product will be available for ordering.
*We don’t share your email. You can unsubscribe at any time.