Anycubic Files Not Showing Up

Posted on  by admin

Model: Anycubic i3 Mega. Firmware: 1.1.0. Slicer: Cura 3.4.1. I need a bit of help because I cannot find my gcode files on the printer. I just set up the printer and was able to print the test owl that came on the SD card just fine. I then used Cura to slice a model and uploaded it to the SD card. Once I put the card back in the printer, the printer registers that an SD card is inserted, but neither of the files show up on the print selection screen. Per the suggestions I found online, I reformatted the SD card as a FAT16 partition and reloaded the files on to the card.

I tried again to open the files on the printer, but again they do not appear on the print menu. Does anyone here have any suggestions on what I can try next to get these files to interface? It’s not a shocking divulgence that Resin 3D printing gives astonishing print quality and objective over FDM. There’s a slight assumption to assimilate data for the people who have never used an SLA/DLP 3D printer, but this obstacle is vanquished quickly in light of the undeniable documentation, working on the web network, and other online resources.

The Anycubic Photon DLP 3D Printer has emerged as the most captivating option accessible.

  1. Anycubic has picked up a reputation for building strong and user-friendly printers like the Anycubic i3 Mega FDM 3D printer.

  2. With respect to the worth, the Anycubic Photon is no exception – it’s undoubdtedly the most affordable DLP 3D printers out there.

  3. Photo

  4. Symptoms*.photon cut document arranged in anycubic/chitu slicer v1.3.6 or Chitubox isn’t identified or won’t print on a unique Photon printer.

  5. Recommended Fixes. Check the firmware version of the printer, if it shows v3.4.x, at that point, you can be sure that your printer is not a unique Photon.

  6. There are other Photon printers, which are called a Fauxton. These are new printers that resemble a unique Photon.

If your printer is not a fauxton printer, then you should contact the salesperson or showroom.

But first, check your motherboard and firmware carefully.