Anycubic Mega-s Bed Size

Posted on  by admin

Company Manufacturer: Anycubic. Price: $280 — Available on Anycubic Official Store / Available on Amazon here / 3DJake UK & Europe here.

3D Printing Technology: FDM. Assembled or Kit: Kit (Partially assembled).

Anycubic Mega-S Maximum Build Volume: 210 x 210 x 205 mm.

Anycubic Mega-S Features

  • 3D printing giant Anycubic has been on the radar of many an aficionado for years, and their Mega-S model 3D printer serves as a testament to their advancements in 3D printing technology.
  • The Mega-S’ predecessor, the i3, became an overnight success for the company.
  • Because of this, they set out to create a new version that builds on the old, which quickly became known for its reliability and ease-of-use.
  • As a result, this upgraded Mega-S model is now known for its beginner-friendly use, easy assembly, reliable output, stronger frame, and more modern technology.
  • While not as accurate as most resin printers, the upgraded Anycubic Mega-S creates better quality models than its predecessor thanks to its filament holder, heated bed, and sturdier frame.
  • The print volume is larger than most at over 200mm³, though this is in part due to its open print area, which means the materials are prone to warping due to external variables.
  • Because it’s an FDM printer, the wallet-friendly nature of the Anycubic Mega-S doesn’t just apply to the purchase.

Anycubic Mega-S Review

Anycubic Mega S 3D Printer

The variety of compatible materials, third-party included, are generally cheaper than the high-end resins of SLA 3D printers.

Conclusion

The Anycubic is compatible with Cura, making it easier for set-up and use, especially for those who have some experience in 3D printing with this slicer before.

Introduction: what is the Anycubic Mega-S

The Anycubic Mega-S is a kit, but comes partially assembled.

After fitting only 8 screws, the Mega-S is ready to go.

This easy assembly makes the Anycubic Mega-S ideal for beginners who still want a hand in putting together their own 3D printer.

The sturdy frame is an upgrade from the previous i3 model, making it more resistant to vibrations.

What You Should Know

This reduces the chance of warping and increases the reliability of the prints. To add to the reliability, the built-in Ultrabase building board boasts a strong hold on the material as it prints. The on-board TFT touchscreen makes for easy navigation and a more streamlined designing to printing process.

Anycubic Mega S Specs

While small, the touchscreen has a full-color display which is simple to use. Included with the Anycubic Mega-S is a filament holder, which allows for more even prints as the filament is equally distributed during the printing process.

Scope of Delivery

This, combined with the heated adhesive bed, means that the likelihood of warped or otherwise unsuccessful prints is dramatically decreased.

Conclusion: Is Anycubic Mega-S Worth It?

Amazing Price: 3D printers with this many add-ons and extra features do not often come as cheap as the Anycubic Mega-S.

Anycubic Mega-S Cons

Where to Buy Anycubic Mega-S

Extras Included: The Anycubic Mega-S comes with a filament holder for even printing, a beginner friendly manual, a memory card, extra screws, and plenty of other bits and pieces to make assembly and use as easy as possible.

A Touch of Color: The touchscreen has a full color display, making navigation easy on the mind and even easier on the eyes.

Beginner-Friendly: The included manual and easy assembly, set-up, and usability of the Anycubic Mega-S make it an ideal 3D printer for beginners.

Main Specs: Anycubic Mega-S

Proud But Loud: The Anycubic Mega-S is a noisy machine due to its lack of insulation.

Because of this, it is not ideal for overnight printing.

At What Cost: The low price of the Anycubic Mega-S is not without its trade-offs.

Anycubic Mega-S Pros

The machine has been known to warp and come loose over time. While there are extra screws included, the Anycubic Mega-S has become known for needing repairs and fixes far earlier than the more expensive models available.

Anycubic Mega-S Dimensions: 410 x 405 x 452 mm. Minimum Layer Height: 100 microns.

Position Accuracy: X/Y: 0.01mm Z: 0.002mm.

Print speed: Recommended 60mm/s – Maximum 100mm/s. Heated Bed: Yes.

Nozzle Size: 0.4mm. Single or Dual Extruder: Single.

Maximum Extruder Temperature: 275℃.

Photon Mono 4K

Maximum Heated Bed Temperature: 100℃. Connectable: Memory card & Data cable. Touchscreen: Small TFT Touchscreen. Automatic Leveling: No. Frame Material: Aluminum.

Software Specs

What parts does it come with:. Extra print head.

Extra limit switch. Filament holder. Compatible Materials / Filaments: ABS, PLA, PETG, TPU.

Material Diameter: 1.74mm. Third Party Material Compatible: Yes. 3D printer software: Cura, Smplify3D, Repetier-HOST.

Compatible File Types: STL, OBJ. OS Compatible: Windows (7+), Mac OS X.

Anycubic Mega-S Full Specs

Here are our trusted partners that sell the Anycubic Mega S:.

The Anycubic Mega-S is a very cheap 3D printer ideal for beginners or people who want a new printer for their collection but don’t want to spend a lot of money.

The price tag for the Anycubic Mega-S will attract many people to the product, and the included extras and hardware are not commonly found in printers at this cost.

Despite its issues, users have praised what the Anycubic Mega-S is for its cost, and many praise its design and function as a great choice for a wallet-friendly 3D printer.

We finally got our hands on the Anycubic Mega-S 3D printer and took it for a spin.

Material Specs

Read our Anycubic Mega S review to find out everything you should know about the specs, price, performance, and print quality.

The Anycubic Mega S 3D printer is an upgrade of the Anycubic Mega 3D printer.

Printing with the Anycubic Mega S

The Mega S has about two to three features that the previous model lacks.

The Anycubic Mega S is shipped in a large box with the main unit at the bottom.

The printer comes with the usual components, including a touchscreen, power supply, mainboard, etc.

inside the housing. A sturdy frame with large Anycubic lettering houses the two Z-axes.

Other accessories that come in the box include a spatula for removing stubborn print objects, a filament holder for attachment to the right Z-axis, an instruction manual, pliers, tools (Allen, screwdriver), a USB cable, a couple of screws, the power cord and a few feet of PLA filament.

Related

A few surprises are also included in the box.

These are a nozzle, a complete print head and a replacement endstop! The Anycubic Mega-S is one of the 3D printers under $300 on Amazon. Assembling the Mega-S takes just a few minutes.

Basically, you just have to mount the frame with two screws each on the right and left and insert a couple of plugs, which then connect all the motors and sensors to the electronics in the housing.

These plugs are located on the right-hand side behind the Z-axis and are color-coded and of different sizes. If you are missing one of the connectors, look in the housing on the right Z-axis.

This note is even in the instructions. So I guess that this plug has already been searched for or missed by several people.

Lighting

After screwing everything together, you need to level the printbed.

Preheated the printer to PLA temperature and then place a piece of paper underneath.

High-speed resin printer with adjustable UV output

Then, adjust the screws on the heatbed so that the print head just barely scrapes the paper.

You can then thread the filament through the new filament sensor and start printing.

In the box, you will find an SD card. The card contains instructions and videos for the printer as well as demo models.

The first print on the Anycubic Mega-S was successful.

The Ultrabase (printing platform) ensures good adhesion.

After leveling, decided to print a couple of FaceShields for the MakerVSVirus campaign .

For the Housing:

Except for a few threads on the printing platform, everything went smoothly.

I printed with cheap PLA, which had been lying around in my filament box for a while.

Basically nothing bothers me apart from the threads.

After a few FaceShields, I printed the owls. Here, too, you can’t complain.

Advanced

I took the sliced ​​models and didn’t change anything on the Gcode.

Again, everything was fine and only a few threads between the ears when the nozzle had run over empty areas.

However, this can be remedied in a few simple steps in CURA.

Take a closer look at Z Hop and Retract and the problem should be history. Finally, I printed a few other little things, including a toothpick dispenser, on Silky Filament.

Silent Printer

Power Supply Cover and Fan

I was satisfied. After you have adjusted the speeds, everything works fine.

The dark blue Silky filament warped without end. I have only been able to fix this to a limited extent with the usual methods.

I didn’t have this problem with either the white or the light blue filament in the test.

So, you can see that sometimes it’s not the printer that has a problem but the filament.

Motor Driver Fan duct and Fan

The coated glass plate (Ultrabase) of the Anycubic Mega-S is a great selling point for this printer.

The plate holds onto it just fine. At a good temperature, the object holds firmly.

If the temperature drops after the pressure, the object often comes off without any aids.

The Anycubic Mega S 3D printer is generally not the quietest. However, it is also not the loudest. Depending on your skills, you can possibly exchange the drivers to reduce the noise.

Motor Driver

The Mega-S’s filament runout sensor is mounted on the side directly after the filament spool.

The extruder has also been modified and is now a titanium clone. Printing with flexible filament should no longer be a problem. So far, I have only printed with PLA.

Swappable Drivers

Also, the filament holder is attached directly to the printer. The filament holder is a bit poorly placed on the right side and has to be adjusted so that normal sized spools fit on it.

However, this works super easy because only a small placeholder element is printed and screwed in between.

Solderd Drivers

All you need is screws a few millimeters longer and the normal filament spools will fit. However, this does not fix the position of the SD card slot, which is located directly between the housing and the spool holder.

You can get it, but the SD slot or holder is definitely not placed in such a smart way.

Swapping Drivers

My display had a bubble but I could still operate the printer well by simply looking at the mainboard etc.

However, i found out that the Anycubic logo on the left and the “S” on the right of the touchscreen is a sticker including a transparent film over the front.

I remove the sticker and the bubble was gone. After removing the sticker, I could see the frame of the touchscreen underneath.

But as always, there is already a replacement on Thingiverse.

Modifications and extensions for the Anycubic Mega-S are already available on Thingiverse.com.

Something for better cable management, something for the heat bed, the filament holder extension mentioned above, other fan brackets for the mainboard or the drivers and much more.

While the printer cables are all gathered together with spiral hoses and fastened here and there with cable ties, it looks like cable breaks could occur at some of these fastenings over a longer period of time.

The Mega-S uses modern technology that ensures the pressure does not have to go into the bin in the event of a power interruption.

Installation

After the power supply has been restored, the menu will ask whether printing should be resumed.

The printing platform is an ultrabase plate that consists of glass and a studded coating.

These are barely visible and ensure that the printed object is held firmly in place.

The plate comes installed with small screweds. There are also metal clips on the aluminum heating plate that prevent it from slipping during printing.

Here is how the inside of the 3D printer looks.

My Voltage:
  • The fan is, of course, usually screwed on over the stepper motors.
  • I like the Anycubic Mega-S very much.
  • It has a small print bed that’s just a little more than 200 x 200 mm.
  • This size is enough for printing most models.
  • If you want to print an Ironman suit, you should go for a large format 3D printer.

The smaller printing platform has its advantages. For example, it heats up much faster. You can put a small insulation mat underneath the print bed to help it retain heat.

Doing this will also make the plate heat up even faster.

Testing

Also, with a smaller print, the forces acting on the printer are not so great.

Therefore, you will not have many errors to deal with when problems arise. The Mega-S printed high-quality models right from the start.

Therefore, I would definitely recommend the printer for beginners in terms of price and performance.

The large touchscreen ensures easy operation and the print head also offers plenty of space inside.

Repairing the printhead is also easy to repair.

You only have to loosen 4 screws to remove half of the housing and reach the small circuit board where the fans are plugged in.

Other

Z-Wobble

Of course, there are opportunities for improvement in various corners and ends.

A quieter fan here, other drivers there, possibly a different filament holder, and lighting on the print head.

However, such points can be found on almost every 3D printer.

For the current price of less than $300 (check current price), the Anycubic Mega S is worth the money.

Anycubic Mega Zero 2.0 Review | Anycubic Mega Pro Review | Anycubic i3 Mega Review | Anycubic Mega X Review | Anycubic Mega S Review | Anycubic Mega Zero Review.

Anycubic Photon Mono X Review | Anycubic Photon Ultra Review | Anycubic Photon Zero Review | Anycubic Photon S Review | Anycubic Photon Review | Anycubic 4Max Pro Review | Anycubic 4Max Pro 2 Review | Anycubic Vyper 3D Printer Review.

Anycubic is a Shenzhen-based 3D technology company that specialises in making low-cost 3D printers.

Mosfet

Anycubic’s philosophy is that 3D printers should be affordable and accessible to everyone as everyone deserves the freedom to bring their ideas, creativity and imagination to life.The company, therefore, strives to make 3D printing solutions available to users all over the world and thus to create freedom of design and application.

The Anycubic Mega X is built for massive build volume coming in at 300 x 300 x 305mm which is able to print models that a majority of 3D printers out there wouldn’t be able to manage.

It’s a great choice for beginners as well as experts in the 3D printing field, so don’t feel intimidated by the size just yet.

Not only do you have build volume, but characteristics such as precision, accuracy and high quality really take this 3D printer at the forefront of the competition.

The main trick up the Vyper’s sleeve is ANYCUBIC’s new auto-leveling technology that gets the entire package calibrated on its own.

Firmware

Otherwise, there’s a pretty modest 245mm by 245mm by 260mm print area, which should be large enough to craft all kinds of different creations.

  • On top of being heated, the bed also pairs with a magnetic plate for easily removing finished models.
  • The screen features new UI interface, smooth and simple operation as well as English and Chinese switching.
  • New UI; Large-size screen; Easy to operate.
  • Anycubic Chiron 3D Printer Major Upgrade Anycubic Chiron 3D Printer Video.
  • New Anycubic Photon Mono 4K (2021) - Unboxing and first prints.
  • mesh bed leveling

This guy did a really good job. He also describes everything very good: Firmware Upgrade

Please also read his explanation carefully!

But I will also do some simple explanation.

If you use still your stock driver take this version:

When you have the TMC2208 V2.0 take this version:

With any other (like TMC2208 V1.2) take this version:

To do the update, you now have to connect the printer to your pc.

Now, just open Cura, and go to Setting -> Printer -> Manage Printer -> and update firmware

Now select the right .hex and update it.

Calibration of the Extruder

First, you will need to download Pronterface:

Just start it up and connect it with your printer via usb cable.

Connection with MacPronterface Printrun software on Mac is via /dev/cu.SLAB_USBtoUART and is 250000

If the field under extrusion is red and you can´t write the extrusion length in it like it is on the picture below,
than follow try this steps: Printrun Pronterface Fix

Now on the printer, remove the plug or fitting on the extruder in which the filament tube is inserted.

Than cut the filament at the top of the extruder so you can measure the length later.

Now in Pronterface:

Write in the space right: ” M503 “and send it.

Should look like this:

Now search the “ M92 X80.00 …. “ line and note the values : E xx.xx

For example, mine: E92.60

At the left fill in at length:100mm at the speed 100mm/min

Than extrude 100mm filament

Now measure the length:

I measured: 96.56

Now calculate:

For me:

100/96.56*92.60 = 95.90

Than copy the “ M92 X80.00 …. “ line and change the E to your calculated E.

My Line would look like this:

Copy your own line than into the field and send it

Than type M500 and also send it.

Now you should be finished!

List of Spare Parts

Some spare parts which are special for the Anycubic Mega:

Thank you!

Just wanted to say thank you to this amazing community.

To everyone, who also built anything to make this printer better.

To everyone, who is helping others.

And especially to these people, which helped me at the beginning.

(*) This all was a lot of work, so I decided to make all my Amazon links, which I would have included anyway, to affiliate links.
There are not any costs for you. But when you buy with my link, I earn a bit.

Also if you want to donate you can do this here: