Anycubic Photon Mono Not Printing

Posted on  by admin

It’s not a shocking divulgence that Resin 3D printing gives astonishing print quality and objective over FDM. There’s a slight assumption to assimilate data for the people who have never used an SLA/DLP 3D printer, but this obstacle is vanquished quickly in light of the undeniable documentation, working on the web network, and other online resources. The Anycubic Photon DLP 3D Printer has emerged as the most captivating option accessible.

Anycubic has picked up a reputation for building strong and user-friendly printers like the Anycubic i3 Mega FDM 3D printer. With respect to the worth, the Anycubic Photon is no exception – it’s undoubdtedly the most affordable DLP 3D printers out there. Photo Things You Might NeedAnycubic Photon Build Plate. Symptoms*.photon cut document arranged in anycubic/chitu slicer v1.3.6 or Chitubox isn’t identified or won’t print on a unique Photon printer.

Check the firmware version of the printer, if it shows v3.4.x, at that point, you can be sure that your printer is not a unique Photon.

There are other Photon printers, which are called a Fauxton.

These are new printers that resemble a unique Photon.

If your printer is not a fauxton printer, then you should contact the salesperson or showroom.

But first, check your motherboard and firmware carefully.

It’s the only way to determine whether you have the correct printer or not.

Attempt to reslice your model and acquire *.pws yield records.

These are the lone records that will print on a Fauxton. If you think you have been sold one of these new printers without your knowing, you should contact your Seller to see if it is the issue.

Printing freezes, aimlessly focuses, resets home screen.

Irregular freezes with error code.

Record program not showing any models. USB key light pointer is off, yet connected (it ought to consistently be on.). On the off chance that you squirm the USB key, you can peruse documents once more. Supplant stock USB key with a realized decent marked one, formatted to FAT32. Just have one document on USB, utilizing short name and no non english characters or spaces. Chances are that difficulty actually happens when you may have an inadequate USB augmentation link or flawed mainboard.

Test with another USB Extension link. You can undoubtedly get to this by eliminating the four screws holding the back vent board.