Cummins Inline 5 Driver Software
Setup Inline 5 data link driver, then add Inline5 adapter to INSITE 8.2.0, finally run INSITE 8.2.0 to do read fault code, manage data logger, do calibration etc.
- Free cummins inline 5 download software at UpdateStar - 1,746,000 recognized programs - 5,228,000 known versions - Software News. » cummins inline 5 driver software.
- Q6: Does Cummins inline 5 contain the newest INCAL software? A6: No, it doesn't. Q7: Part one: I have installed the insite software and the driver for inline hardware, but wen i connect the hardware, my computer do not detect the hardware, and no LED is flashing on the device.
Tools & software to use:
INLINE 5 software CD (P/N 4918417) 7. Cummins INLINE 5 features: Supports SAE J1708/J1587 and J1939/CAN data links. Supports USB full speed port at up to 2M baud rate. Supports RS-232 PC/PDA serial port at up to 115.2k baud rate. Is fully compliant with TMC's RP1210 standard. Small enough to fit in pocket.
Cummins INLINE 5 Data Link Adapter (Cummins Inline 6 data link, Nexiq etc)
INSITE 8.2.0.184 (Pro version or lite verion)
INSITE 8.2.0.184 download
Works on win7 8 10 (Win10 run as administrator)
Very Important:
Uninstall any anti-virus software programs, firewall, etc.
Step 1: setup Inline 5 driver on Win 7 32bit
This is Windows 7 32-bit.
Open software CD
Open INSITE.7_6_2.rar-> Software folder->INSITE 5 Drivers
Copy and paste Inline 5.7.0.1 Setup- 32 Bit.exe on the desktop.
If you have 64-bit system, copy and paste Inline 5.7.0.1 Setup- 64 Bit.exe on the desktop
Install the Cummins Inline5 data link adapter driver (Inline 6, Nexiq or other adapters can work too)
Run Inline 5.7.0.1 Setup-32 Bit as administrator
Click on NEXT
Inline 6 Adapter Driver
Get windows security warning, accept it and continue setup the driver software
Tick “Launch Inline 4/5 Reflash Tool” and click on Finish
Delete the “Inline 5.7.0.1 Setup-32 Bit“on desktop
Device driver has been successfully installed
Open Computer->Manager->Device Manager->Universal Serial Bus Controller, to check whether the driver has been established a good communication with the computer.
Step 2: Add Inline5 adapter to INSITE 8.2.0
Open INSITE 8.2.0.184 pro or lite version software on the desktop
Select the option “Add New“ on the middle of the bottom tool bar
Click on “Next” to install ECU Connection Wizard
Select RP1210 adapters, click on Next
Select Vendor, Adapter INLINR 5 USB and protocol Auto detect, click on Next
Click on Next
Tick both 2 options and click on Finish
One more time, the software will ask to install ECU connection wizard, click on NEXT
Setting one more time and select the protocol J1708.
Click on Finish
Setting one more time and add protocol J1939
Click on Finish and cancel the ECU connection wizard interface
Please add the corresponding adapter in the Insite software
Select “INLINES USB (Auto Detect) Connection” in the middle of bottom tool bar
Click on the “Connect” button to connect to ECM
Start to use theinsite 8.2.0.184 software to read fault code, manage data logger, do calibration etc
The insite 8.2.0.184 tech support is provided by www.uobdii.com