Interior Stone Wall Cladding Uk

Posted on  by admin

International Shipping. Your recently viewed items and featured recommendations . After viewing product detail pages, look here to find an easy way to navigate back to pages you are interested in. Your recently viewed items and featured recommendations .

After viewing product detail pages, look here to find an easy way to navigate back to pages you are interested in. © 1996-2022, Amazon.com, Inc. or its affiliates. Installing wood wall panels might sound like a big chore, but it’s not as complicated as it might seem. Keep in mind that the process will differ depending on which type of panels you buy.
So make sure your walls are the following:. Sturdy enough to support wooden panels. Clean from debris; use a dry cloth to wipe away any dust. Free from trim around doorways, windows, etc.; remove trim and skirting boards before starting. Free from outlet covers and switch plates. You should also acclimate your wooden panels by leaving them in the room for a few days.
Before cutting any of your wood panelling, lay out your sheets on the floor for a preview. Once you’re satisfied with your wood panelling design, you can start applying! You’ll need a caulking gun loaded with panel adhesive.
Pull the panel away from the wall a bit to make the adhesive tackier, then push it back into place with a rolling pin.

To finish, drive nails into place at the top of the panel and put the skirting boards back in place to secure the bottom.

VEGETATIVE SOLUTIONS

Hot-applied membrane adhesives are time-tested, proven adhesives and waterproofers designed to adhere base and cap sheets securely together.

VIEW ADHESIVES

Restoration coatings are specifically formulated as liquid waterproofers, and are an economical option to extending the service life of a roof.

COATING SOLUTIONS

Sealants are essential in keeping buildings waterproofed by blocking the passage of water, air and contaminants. Sealants are not always adhesives, but many have adhesive qualities.

VIEW SEALANTS

Mastics are typically thicker, trowel-grade adhesives designed for installing flashings, sealing seams, and basic field repairs.

VIEW MASTICS



Accessories, including Wall Coatings, Sealers & Cleaners

Garland’s accessory line includes wall coatings, sealants and cleaners – all designed to work with the components of your Garland roof system.

VIEW ACCESSORIES

Plaza decks protect, waterproof and beautify concrete and plywood deck surfaces that function as both a floor and a roof. Plaza deck accessories to help achieve your performance objectives and provide a more durable and aesthetically pleasing deck coating system.

PLAZA DECK SOLUTIONS

Garland offers four interior flooring systems that help improve safety, aesthetics and provide an increased level of protection.

FLOORING SOLUTIONS

Accessories Links

Garland Accessories


Protecting what matters most with Defense Force
Garland’s core focus has always been on keeping our employees, customers and communities safe. We’ve done so for the last 125 years by providing waterproofing solutions for the entire building envelope. The world’s current health crisis has prompted us to look beyond our traditional offerings to provide you with new and more powerful ways to protect your facilities.
Garland’s new Defense Force™ line of innovative products is designed to either clean, disinfect and/or protect commercial facilities while also helping combat sick building syndrome. We know protecting the outside of your building is the first step in protecting the people inside. And to us, there is nothing more important.
Why consider the health of your building?

Clean-Shield™

Biodegradable, nontoxic solution that safely and effectively cleans, brightens and restores a variety of masonry surfaces.

Clear-Shield™

Clear acrylic water-based solution that protects a roof's existing surface.

D7™

Effective and safe antimicrobial disinfectant that kills bacteria, fungi, germs and viruses in minutes and has demonstrated effectiveness against viruses similar to the coronavirus/COVID-19.

Accessories

Garland’s accessory line includes wall coatings, sealers and cleaners – all designed to work with the components of your Garland roof system.

Fill-Lock TG

Fill-Lock TG is a trowel grade bonding and repair adhesive formulated with high-performance epoxy. This fast-curing, multi-purpose material can be used as an adhesive and a patch material.

Gar-Rock®

Fast-setting, concrete patching material for filling the bottom of pitch pans to receive the pourable filler

Seal-A-Pore® HP

Solvent-based silane sealer that forms an invisible water repellent surface over exterior masonry substrates, allowing the building to maintain its original appearance

Seal-A-Pore®/WB

Clear damp-proofing solution that eliminates moisture penetration from exterior, above grade masonry surfaces

Standard™ Roofing Granules

Garland’s Standard Roofing Granules are semi-ceramic coated granules that are broadcast by hand or air assist into cold-applied adhesives or to asphalt bleed out to produce a durable, reflective roof surface.

Sunburst™ Minerals

Surfacing minerals that provide a superior reflective surface

Tuff-Coat®

Acrylic architectural wall coating that damp-proofs, bridges small cracks, hides stains and discoloration, and reduces wall temperature

Hot-Applied Membrane Adhesives Links

Cold-Process Adhesives

Cold-applied membrane adhesives offer a low odor alternative to hot-applied adhesives.

Black-Knight Cold

Coal tar-based membrane adhesive designed for applications where a high level of chemical or ponding water resistance is required.

Green-Lock® Plus Flashing A...

Green-Lock Plus Flashing Adhesive formulation is the odorless, fast-curing roof mastic for field repairs and flashing installations of both asphalt and modified bitumen flashing installation.

Green-Lock® Plus Membrane A...

Green-Lock Plus Membrane Adhesive is the low odor, 100% solids, fast-curing membrane adhesive that contains zero VOCs and is the ideal product for use on projects with strict environmental and odor limitations.

Insul-Lock HR

Low odor, high rise roof insulation adhesive designed to bond approved roof insulations to a building's roof deck, base sheets, and a variety of roofing systems

KEE-Lock™ Foam

High-performance foam adhesive engineered to fully adhere Garland’s KEE-Stone® roof system.

KEE-Lock™ WB Flashing Adhesive

Water-based, solvent-free adhesive for use with Garland’s KEE-Stone NF 60 (Non-Fleeceback) Flashing membrane.

Weatherking® / Plus WC Memb...

Asphalt-based, interply membrane adhesive for use with any Garland asphaltic modified base and cap sheets.

White-Star

White polyurea roof adhesive provides superior waterproofing and UV protection, lowering energy costs.

Hot-Applied Membrane Adhesives

Hot-applied membrane adhesives are time-tested, proven adhesives and waterproofers designed to adhere base and cap sheets securely together.

Garlastic® KM Plus

Rubberized asphalt adhesive with a broad application temperature range that ensures excellent bonding and durable seams.

HPR® All-Temp

High-grade waterproofing bitumen ideal for climates with large temperature fluctuations.

Reflective Coatings Links

Restoration Coatings

Restoration coatings are specifically formulated as liquid waterproofers, and are an economical option to extending the service life of a roof.

Adhesion Test Kit

Garland's reputation for high-performance and long-lasting systems is not only based on our world class R&D, but also on our high standards in the field.

Garla-Shield®

Water-based, low-odor, asphaltic emulsion restoration coating utilizing fibers for added strength.

R-Mer Coat

R-Mer Coat industrial maintenance coating system restores exterior metal surfaces to look like new – and last longer too!

WeatherScreen™

Asphaltic coating designed to restore asphalt roof systems or provide a flood coat for new roof systems.

Reflective Coatings

Reflective coatings enhance the appearance of roofs while also extending the service life by protecting against UV degradation. Reflective coatings also increase energy savings by keeping buildings cool and decreasing air-conditioning costs.

Garla-Brite®

ENERGY-STAR® certified, highly reflective, asphaltic aluminum finished, UV-resistant roof coating.

Pyramic®

White, water-based, non-toxic, coating extends the life cycle of the roof by preventing aging and deterioration due to UV damage.

Pyramic® Base Coat

Gray tinted acrylic coating used as a base coat underneath Pyramic topcoat.

Pyramic® Plus LO

Pyramic Plus LO is a bright white, water-based, acrylic-urethane roof coating designed to preserve asphaltic modified bitumen surfaces from UV degradation and lower temperatures on the roof surface (and even reduces them inside the building).

Pyramic® Plus LO Base Coat

Gray, water-based, acrylic-urethane, non-toxic base coat designed for optimal use in the Pyramic Plus LO two-coat system.

Rust-Go® VOC Top Coat

Environmentally friendly acrylic roof and wall coating that protects interior and exterior metal surfaces from corrosion and premature aging.

Silver Shield®

Highly reflective, aluminum coating that can reduce roof temperatures by 15 degrees, reducing energy costs.

Solex®

White, Kynar Aquatec®-based roof coating that maintains solar reflectance values greater than 0.85 for many years.

Primers

Primers are preparatory coatings that promote adhesion of coatings or roll goods, inhibit the development of rust, or serve a protective stain-blocking layer.

Black-Knight® Primer

Coal tar-based primer that provides maximum surface adhesion to Garland’s Black-Knight coal tar products.

Eco-Seal Primer

Eco-Seal Primer is a hybrid, acrylic joint sealant primer specifically formulated to enhance the performance of Garland’s Tuff-Stuff® MS and Green-Lock® Sealant XL as well as powdery masonry substrates such as brick, block, stucco, and EIFS.

Garla-Block™ Primer

Bleed-blocking, water-based acrylic primer enhances adhesion while preventing stains and discoloration of your reflective coatings caused by asphalt and coal tar roof systems.

Garla-Prime

Asphaltic roof primer that enhances adhesion and improves coverage of all Garland asphalt-based products. Garla-Prime is an economical way to ensure maximum quality and performance of all Garland asphalt-based products.

Garla-Prime™ VOC

Asphaltic, low VOC alternative to Garla-Prime that acts as a bonding agent for surfaces that can be difficult to adhere to.

Insul-Lock HR Universal Primer

Water-based, VOC-compliant primer for use with Insul-Lock HR over smooth, mineral and gravel surfaced built-up roofs.

R-Mer Coat Primer

Water-based, low-VOC primer enhances adhesion of a variety of metal surfaces in a cost-effective and eco-friendly manner.

R-Mer Coat PVDF Primer

Water-based adherence to Kynar 500 PVDF and other PVDF based finishes proves superior in efficient application and customer satisfaction.

Rust-Go® Primer

Rust inhibitive primer that enhances the adhesion and performance of Rust-Go VOC Top Coat, Revitalizer Metal, and CPR systems.

SA Primer™

Emulsion-based primer used to improve the adhesion of Garland’s self-adhering modified membranes.

Accessories Links

Flooring

Garland offers four interior flooring systems that help improve safety, aesthetics and provide an increased level of protection.

Deco-Zone® Flake Flooring S...

A decorative and durable floor system with superior UV protection

Deco-Zone® Quartz Flooring ...

A decorative flooring system with a protective finish that is suitable for most commercial and industrial applications

Tread-Shield® Flooring System

High-build epoxy flooring system ideal for use in hospitals, light industrial areas, plant offices, prep kitchens, maintenance shops and commercial laboratories

Tread-Shield® Plus Flooring...

An epoxy flooring system designed to withstand forklift traffic and heavy industrial equipment

Accessories

Chem-Screen Topcoat

Chem-Screen Top Coat is a two-component, high solids, colored topcoat designed for applications where splash and spills of acid, chemicals and solvents occur.

Fill-Loc™ Crack Repair

Epoxy crack repair to fill hairline stress cracks found in most concrete floors and walls

Oil-Stop™ Primer

Solvent-based epoxy coating for use on petroleum-based, oil-contaminated concrete.

Perma-Joint™ Sealant/FS

Hybrid sealant used to fill control and expansion joints in concrete floors

Perma-Top Patch Kit

Concrete repair compound used to repair holes and wide cracks in concrete floors

Perma-Top™ Cove

Urethane mortar to create a seamless cove before the application of an epoxy or urethane flooring system

Tread-Shield® Primer WB

A two-component, water-based, VOC compliant primer for concrete floors.

Tread-Shield® Topcoat

Two-component, 100% solids topcoat designed to provide durability to a flooring system while also improving aesthetics.

Fluid Applied Membranes

Fluid-applied roof membranes are durable fabric-reinforced systems that provide seamless and robust waterproofing protection to modified bitumen, BUR, metal and single-ply roofs.

Adhesion Test Kit

Garland's reputation for high-performance and long-lasting systems is not only based on our world class R&D, but also on our high standards in the field.

Cool-Sil™ Silicone Coating ...

Cool-Sil extends the life of aging single-ply, modified bitumen and metal roofs while eliminating the need for a full replacement.

CPR™ Base

Highly rubberized base coat that adheres to older, aged metal roofs to bridge hairline cracks, maintaining a continuous film of protection.

CPR™ White Coating

Highly-reflective liquid rubber membrane with high tensile strength and elasticity that provides excellent protection against UV and deterioration on metal roofs and walls

Energizer® BK

Asphalt and coal tar fluid-applied membrane provides natural resistance to moisture, chemicals, UV and aging

Energizer® K Plus FR

Asphaltic fluid-applied membrane with KEVLAR® fibers that provide increased tensile strength, UV crack resistance and superior fire resistance

Energizer® LO

Asphalt/polyurethane blended, low odor fluid-applied membrane that cures faster than traditional asphalt coatings

LiquiTec®

Two-component, incredibly tough, low odor aliphatic polyurea fluid-applied membrane that cures quickly and has zero VOCs

Revitalizer™

Heavy-bodied, asphaltic fluid-applied membrane with high strength and elongation for superior waterproofing protection

Revitalizer™ Metal

Asphaltic waterproofing membrane designed to restore through-fastened metal systems.

White-Knight® Plus/White-Kn...

Highly-reflective, fluid-applied membrane with moisture-triggered technology for a faster cure and superior strength and durability

Asphalt Built-Up Roofs and Modified Bitumen Roofs Links

Coal Tar Built-Up Roofs and Millennium Roofs Links

Mastics

Mastics are typically thicker, trowel-grade adhesives designed for installing flashings, sealing seams, and basic field repairs.

CPR™ Seam Sealer BG and TG

Synthetic liquid rubber, solvent-based restoration coating that bridges gaps in metal roofs, walls and problem areas such as gutters, expansion joints, etc. Available in brush grade (BG) and trowel grade (TG).

Flashing Bond®

Cold-applied, trowel-grade asphalt roof mastic for patching, leak repairs and flashing installations on asphalt built-ups and modified bitumen roof systems

Garla-Flex®

Highly rubberized asphalt roof mastic seals around roof joints, metal pitch pockets and metal edges.

Green-Lock® Plus Flashing A...

Green-Lock Plus Flashing Adhesive formulation is the odorless, fast-curing roof mastic for field repairs and flashing installations of both asphalt and modified bitumen flashing installation.

Silver Flash®

Aluminum asphalt roof mastic that eliminates the need to surface with minerals or a reflective coating

Tuff-Flash™ Plus LO

Tuff-Flash™ Plus LO is a multi-purpose, two-part, asphaltic polyurethane-based, low-odor, liquid flashing membrane designed to create a watertight flashing on tough roofing details that are difficult to seal with a typical modified membrane.

Weatherking® Flashing Adhesive

Weatherking Flashing Adhesive is a cold process, modified adhesive used to apply flashings in conjunction with Garland’s cold-applied Weatherking roofing systems.

Wet-Cote™

Emergency leak repair material for use during wet weather.

Asphalt Built-Up Roofs and Modified Bitumen Roofs

KEE-Lock™ Mastic

White, cold-applied, trowel-grade flashing mastic designed to seal the base edge of KEE-Stone FB 60 Flashing where it ties into the field of an SBS-modified membrane roof system

Coal Tar Built-Up Roofs and Millennium Roofs

Black-Knight® Mastic

Coal tar, quick-drying, trowel-grade coal tar mastic used to make repairs on coal tar roof systems and install flashings on Millennium® roof systems

Metal

Garland’s metal solutions combine watertight integrity, aesthetic versatility, and intelligent sustainability to meet the widest possible range of functional and aesthetic requirements. Our flagship structural standing seam metal roofing system provides the highest performance in windstorm and water penetration in the industry. We also offer a complete range of metal trim, termination, and flashing systems, as well as fully integrated wall systems through our sister company IMETCO.

R-Mer Lite® II

A lightweight insulated retrofit steel roof system that saves money on cooling, labor and maintenance

R-Mer Lite® Wall Panel

Multi-use steel wall covering system ideal for wall transitions between roof sections

R-Mer® Edge Coping

Premium metal edge coping system compliant with code required ANSI/SPRI ES-1 standards features a snap on cap with no exposed fasteners

R-Mer® Edge Fascia / R-Mer®...

Premium metal edge fascia system compliant with code required ANSI/SPRI ES-1 standards features a snap on fascia cap over a continuous base anchor

R-Mer® Force

R-Mer Force, is engineered to save both time and material without sacrificing strength by completely eliminating the need for flashing plies that would ordinarily be installed at the roof’s edge.

R-Mer® Loc

Architectural and structural standing seam roof ideal for re-roof applications, mansards and new construction

R-Mer® Shield

Standing seam structural metal roof system that can withstand wind speeds over 200 mph, providing unrivaled strength, durability and waterproofing protection.

R-Mer® Soffit

Architectural soffit system used to provide concealment of overhangs for a finished look all while allowing ventilation of the roof system

R-Mer® Span

Standing seam structural metal roof system that can be used on slopes down to ¼-inch per foot

R-Mer® SS Sheet Stock

High gloss, factory painted flat stock sheets available in steel, aluminum or exotic metals can be fabricated for multiple accessory uses

R-Mer® Wall-Pan

Custom-formed, easy-to-install flush seam wall panel system designed to stop moisture penetration into the most vulnerable part of the building – the walls

S-5!™ Snow Retention System

Snow retention system that uses clamps to grip the metal seam, eliminating penetrations and lessening the possibility of leakage.

Snow Guard

Heavy-duty, aluminum accessories that protect against the dangerous movement of frozen precipitation on a sloped roof

Vented Hat Channel

Steel framing component provides structural support for rainscreen systems

Accessories Links

Plaza Decks

Plaza decks protect, waterproof and beautify concrete and plywood deck surfaces that function as both a floor and a roof

Dura-Walk® CWH

Dura-Walk CWH is a hot-applied, seamless waterproofing membrane. This 100% solids rubberized, asphalt-based formula is fluid applied to form a continuously-adhered waterproofing system over a variety of substrates.

Dura-Walk® Pedestrian System

Durable, abrasion resistant polyurethane pedestrian plaza deck system

Dura-Walk® Vehicular System

High-performance polyurethane plaza deck system designed to protect vehicular decks and parking structures

Protector SS

Protector SS provides excellent water repellancy to reduce cracking, spalling, freeze-thaw damage, chemical degradation, biological growth, efflorescence, and dirt pickup, thereby lengthening substrate life and reducing maintenance costs.

Accessories

Plaza deck accessory to help achieve your performance objectives and provide a more durable and aesthetically pleasing deck coating system

Dura-Walk® Polyester Tape

Fiber-woven, polyester tape used as the reinforcement layer in any Dura-Walk plaza deck system

Membranes (Cap Sheets) Links

Reinforcements Links

Base and Felt Sheets

Base and felt sheets offer heat resistance and low temperature flexibility to create a stronger, more secure roof assembly.

FlexBase® 80

Base sheet used as the initial ply of a multitude of Garland’s hot- or cold- applied built-up or modified bitumen roofing systems

FlexBase® E 80

Fiberglass/polyester reinforced base sheet with KEVLAR® fibers to provide superior resistance to building movement

FlexBase® Plus 80

Asphalt-modified base sheet with tensile strength in excess of 300 pounds per inch for use in BUR or modified bitumen two-ply roof systems

HPR® Glasbase / Premium

Asphalt-coated, inorganic fiberglass base sheets used in Garland’s cold-applied BUR and modified roof systems

HPR® Glasfelt/Premium

Heavy-duty, asphalt-saturated fiberglass felt used as the ply sheet in Garland’s hot-applied built-up and modified roof systems

HPR® SA FR Base Sheet

Self-adhering, fire retardant, fiberglass reinforced base sheet

HPR® Torch Base

Torch-applied base sheet used as the underlayment ply for any torch-applied system.

HPR® Tri-Base Premium

Triple-reinforced base sheet with superior tensile strength and elongation properties

Millennium® Base

Coal tar, fiberglass/polyester reinforced base sheet

Millennium®/ Millennium FR ...

Coal tar modified membranes highly resistant to ponding water, chemicals and high and low temperature extremes.

SA Base IV

Self-adhered base sheet designed for use with the StressPly IV torch-applied roof system

StressBase® 80 / 120

Multi-functional base sheets can be used in a variety of hot- or cold-applied roof applications

VersiPly® 40

SBS modified base sheet designed for use in roof systems with three plies or more

Membranes (Cap Sheets)

Garland’s high-performance roof membranes are the first line of defense against Mother Nature, offering unparalleled strength, durability and functionality.

KEE-Stone Utility Roll

Thermoplastic membrane enhanced with Dupont Elvaloy HP provides permanent flexibility and weatherability in any climate, all in a 6” wide roll.

KEE-Stone® FB 60

Long-lasting thermoplastic membrane leads industry in UV and aging performance

KEE-Stone® FB 60 Flashing

Two-ply, fully-adhered thermoplastic and asphalt-modified flashing system

KEE-Stone® NF 60 Flashing

Non-fleeceback flashing membrane with a lighter and more workable composition for easier installation and stronger performance.

Millennium® FR / Mineral

Coal tar modified membranes highly resistant to ponding water, chemicals and high and low temperature extremes

OptiMax® / FR Mineral

An innovative roof membrane that provides 40 years of protection

StressPly® E / E FR Mineral

Eco-friendly modified bitumen membrane that contributes to LEED® points

StressPly® EUV / EUV FR Min...

Environmentally friendly modified bitumen membranes with tensile strength in excess of 700 pounds per inch

StressPly® IV / IV Mineral

Torch-applied modified membranes ideal for hard to access areas or projects with odor limitations, such as schools or hospitals

StressPly® IV Plus / IV Plu...

These torch-applied membranes eliminate the use of a kettle and are ideal for hard to access areas

StressPly® Max* / Max FR Mi...

Strongest modified membrane of its kind in the industry with tensile strength of 1,000 pounds per inch

StressPly® Plus* / Plus FR ...

Composite reinforced modified membrane provides superior low-temperature flexibility, weathering and elastomeric properties

StressPly® SA FR Mineral

Self-adhering, fire resistant modified bitumen membrane ideal for use at schools, hospitals or anywhere odors are a concern

StressPly®* / FR Mineral

Modified bitumen membranes with tensile strength in excess of 200 pounds per inch

VersiPly® 80 / Mineral

Modified membranes with advanced rubber technology that provides enhanced weathering capabilities

Underlayments and Air/Vapor Barriers

Air/vapor barriers stop uncontrolled airflow into the building.

HydroShell™ SA

Self-adhering air, vapor and water barrier membrane

R-Mer® Seal

Self-adhering, high-temp metal roofing underlayment and vapor barrier

Terra Seal®

Self-adhering clay or concrete tile roof underlayment

Reinforcements

Reinforcements provide increased strength performance characteristics.

GarMesh®

SBR-coated fiberglass scrim used to repair roof blisters, factures, punctures and other defects

Grip Polyester™ Firm/Soft

Reinforcement fabric used in a cold-applied restoration system

HPR® Polyscrim Plus

Continuous filament, polyester felt functions as the interply reinforcing fabric of a multi-ply roof system

Ulti-Mat™

When incorporated into a roof restoration system, this full strand fabric seals, waterproofs, preserves and protects the roof system

UniBond ST™

Fatigue resistant, self-priming tape seals and reinforces seams and penetrations on metal and single-ply roof systems

Sealants

Sealants are essential in keeping buildings waterproofed by blocking the passage of water, air and contaminants. Sealants are not always adhesives, but many have adhesive qualities.

All-Sil™

A clear, multi-purpose silicone sealant unaffected by sunlight, rain, sleet, snow, UV, airborne contamination, ozone or temperature extremes

Green-Lock® Sealant XL

A single-component polyether, zero VOC, 100% solids joint sealant designed for large interior or exterior joints and cracks where 50% joint movement is needed

Green-Lock® Structural Adhe...

Single-component, zero VOC, odor-free adhesive designed for difficult bonding and sealing applications throughout the building envelope

Night-Lock™

Solvent free, low odor and VOC free night tie-in foam sealant designed to ensure overnight watertight protection.

Tuff-Stuff® MS

Single-component, moisture curing, solvent-free hybrid sealant and adhesive that bonds materials of similar and dissimilar surfaces, porosities and coefficients of expansion

Vegetative

Garland's sustainable roofing solutions with numerous environmental benefits.

GreenShield® Filterdrain 110

High-density, polyethylene filter mat allows excess water from a vegetative roof system to filter through and shed off the roof

GreenShield® Module

Vegetative roof tray system that provides aesthetic flexibility and easy access to underlying roof systems

GreenShield® Oasis

Soilless plant growth substrates that can be used in both intensive and extensive vegetative roof systems

GreenShield® Root Reinforce...

Nylon root stabilizer mat provides a unified substrate for roots to tie into.