Interlocking Plastic Wall Panels

Posted on  by admin

Sanitizing Acrylic and Polycarbonate Sheet [X]

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade.Please review our full return and shipping policy here. Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks. Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16".

Main Benefits

  • Please be aware that some measuring tapes may have even smaller increments.
  • The sliding end hook is designed for two different types of measurements.
  • An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material.
  • When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness.
  • The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
  • Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting.
  • To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items.
  • The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.
  • • sBioMed Steriplex SD• Safetec Surface Wipes• Contec Healthcare Perodox RTU• Contec Healthcare PS-911 EB Prostat Sterile Wipes.
  • • Pharmacy Grade Hydrogen Peroxide• Household Bleach• Isopropyl Alcohol (Water Diluted to 30% Strength).
  • Tongue and groove system allows for quick installation.
  • Tongue and groove design hides fasteners and allows for expansion and contraction.

Typical Applications

  • Easy to clean/sanitize smooth surface.
  • Chemical, mold, and bacteria resistant.
  • Waterproof and will not rust. Excellent chemical resistance.
  • Resists gasses from animal waste. Excellent light reflectance.
  • High-gloss white finish. Non-flammable - Class A fire rated (ASTM E84-17a).
  • As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable.
  • If you need an over- or undersized item, note it under "Comments" during Checkout.
  • Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade.Please review our full return and shipping policy here.
  • Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions.
  • As each cut is nominal, even the slightest miscalculation could be costly.
  • Extend your tape measure several inches to find the 1 and 2 inch markers.
  • In between the inch markers you’ll find 16 equally spaced tick marks.
  • Measure by counting the increments beyond the nearest inch.