Good audio and great EQ at a very reasonable price
I am using the line-in on my Creative Sound Blaster Z (PCI-E sound card). When monitoring the line-in in Cubase 5, the meters show a constant noise of around -52dBFS (it varies very slightly, within +/- 1dB).
Creative Sound Blaster Z
The instructions talk about Windows 7 and 8. No mention at all of 10. This is apparently because it was manufactured a long time ago, boxed up, and sat on a shelf. And the price never came down.Does it work in Windows 10?
Creative Sound Blaster Z
- And you have to wonder if it will continue to be supported, since it's already so old.I remember buying a Sound Blaster card for my Macintosh back in the day.
- Creative made a lot of promises, but they actually never completely supported the card and abandoned it almost immediately, leaving me with a very costly paperweight.
- My irritation over this faded during the last 15 years.
- Now it's back, because apparently I'm paying 100 dollars for Windows Vista junk.Come on, Creative.
If you care about your customers at all, you have to lower the price of your nearly obsolete offerings.
The Sound Blaster Z is the entry card in the Z-Series sound card line-up. For about a hundred dollars, Creative Labs delivers good if unexceptional audio, 5.1 surround sound support, a great microphone, and a comprehensive EQ solution that suits gamers, film watchers, and tinkerers alike. There are better sound solutions for the price, but they don’t come equipped with as many features as the Sound Blaster Z.
Design: Simple and functional
The Sound Blaster Z is sleek and svelte. On the exterior, the Z card has a heavy, red metal casing that guards the PCB from electrical interference. On the inside, the Sound Blaster Z relies on a Sound Core 3D chipset, a MAX97220A 125 milliwatt headphone amp IC, and high-quality Nichicon capacitors. It delivers a 116 dB SNR, which is a lower noise interference rating than most budget motherboards. The card offers ASIO support, 24-bit 192 kHz stereo direct audio, and 5.1 surround support.
Unfortunately, Sound Blaster does not provide a frequency response for the card (humans usually hear sounds between 20 and 20,000 Hz). Its main channels include a mic input, a headphone output, 3 line-level speaker outputs, and an optical SPDIF input and output. All auxiliary jacks are 3.5mm. The card connects to the motherboard via a vacant PCIe slot of any size. The included beamforming microphone is small and has a clip so it can be attached to the top of monitors. It’s a nice addition from Creative Labs, and it’s plug and play. There’s nothing spectacular about the card, but it looks and feels nice, and it provides the necessities.
Setup Process/Installation: Some annoying defaults
Setting up the Sound Blaster Z is not difficult, but there are a few things to keep in mind if you want neutral sound. To install the hardware, we plugged the card into an empty PCIe slot, and we installed the drivers from Creative Labs’ website. When we first listened to music with the Sennheiser HD800, it sounded awful; five minutes into the experience, we realized that a bunch of EQ settings are on by default. We turned off all sound modifications in the Z Series software suite and noticed a significant improvement in the quality of the audio. None of this was difficult to do, but it is aggravating that Creative Labs enabled EQ by default. As for the microphone, we just had to plug it into the mic input and then open our recording software.
Audio: Thin on the mids and bass
The 125-milliwatt headphone amp was enough to drive the HD800, which is great news for those with high impedance cans. The sound was good, but not great. Mids and bass are recessed, meaning the sound lacked richness. The card was also not fast enough to keep up with technically demanding audio, such as blast beats in metal or trilling and 64th notes on classical instruments. These details are relatively minor, however, and less discerning ears may never notice. None of these are details that will stand out unless you own $300+ headphones.
On the pro side, the sound is clear and crisp, the treble and upper mids are excellent, and the lows are reasonable. The microphone also sounds crisp, and it does a great job at reducing the ambient noise. When gaming, the sound stage was good, and the “Crystallization” EQ preset was great for communicating with teammates and boosting treble (footsteps, explosions, etc.). Movie watchers should be similarly pleased by the Dolby encoding support, designed to boost immersion and engagement via a film’s audio.
The sound is clear and crisp. The treble and upper mids are excellent, and the lows are reasonable.
Software: Tons of options, limited utility
The Sound Blaster Z uses the Z Series software. We’ve previously reviewed the software in our Sound Blaster ZxR review, but we’ll include a summary here. The software has the standard EQ settings, like bass boost and virtual surround, which perform as promised. However, we struggled to find utility in more niche EQ settings, such as Scout Mode, and we would have been satisfied with a more basic EQ menu.
Price: Not a great value
The Sound Blaster Z sounds good for the money. It is better than a cheap onboard motherboard sound chip, but a price tag of about $100 is a bit steep given the lackluster audio quality. For the same price, there are higher-quality external amp-DAC solutions, and the $100 may be better invested into acquiring higher-quality headphones or speakers. The Z Series software, while convenient, isn’t a card-selling feature, and the Sound Blaster Z sounds worse than modern high-end motherboard audio, such as the MSI Carbon Z370’s onboard sound. The card may be a worthwhile buy if your audio system is being held back by, say, integrated Intel audio or Realtek audio, which are some of the cheapest and most basic audio configurations in modern motherboards.
Competition: Struggles against similarly priced solutions
The Sound Blaster Z is a middling card at a middling price, and while it outclasses budget cards for both performance and value, its $100 MSRP looks steep when compared to alternatives at the same price point, particularly if your primary criterion is sound quality.
It does shine against some of the cheaper Creative Labs offerings, however, like the Audigy RX (MSRP $55). In testing, we found the Audigy RX did not improve our audio experience and underperformed compared to our MSI Carbon Z370 onboard audio and our MSI GS70 6QE onboard audio. Read our review of the Audigy RX here.
The Sound Blaster Z is a middling card at a middling price.
On the opposite end of the price spectrum, the EVGA Nu (MSRP $249) is a phenomenal card released in 2019. It is built with expert craftsmanship in tandem with Audio Note, a high-end audio company. The card was audiophile-worthy, with sound that held its own against $1,000+ dedicated audio setups, and while it’s significantly more expensive than the Z, every penny is justified. Read our review here.
For about the same price as the Sound Blaster Z, you could buy the Schiit Fulla (MSRP $99), an external Amp/DAC machine. It’s extremely well built, and its dual high quality LMH6643 output amplifiers can deliver up to 550 milliwatts, over four times the Sound Blaster Z. That’s plenty of wattage for most headphones under $250, and the Schiit Fulla delivers a high quality audio experience.
A solid choice for gamers, but underwhelming for audiophiles.
The Sound Blaster Z delivers good sound and a robust software suite in a $100 package. There are better sounding options for the price, but the Z does add value by way of a solid microphone and a comprehensive EQ package. We recommend this product to gamers looking to make the most of a treble-focused sound.
Similar Products We've Reviewed:
- Product Name Sound Blaster Z
- Product Brand Creative
- UPC Model Number SB1500
- Price $100.00
- Release Date November 2012
- Product Dimensions 14.6 x 4.1 x 7.9 in.
- Inputs/Outputs 1x 3.5mm Headphone Amplifier, 3x 3.5mm Line-Outs (5.1 Enabled), 1x 3.5mm Mic Input, 1x TOSLINK Optical Output, 1x TOSLINK Optical Input
- Audio Interface PCI Express
- Frequency Response 100Hz to 20kHz (microphone); 10Hz to 45kHz (headphones)
- Output Signal to Noise Ratio 116 dB
- Headphone Amplifier 16-600 ohms
- Chipset Sound Core 3D
- Digital-to-Analog Converter Cirrus Logic CS4398
- Headphone Op-Amp New Japan Radio NJM2114D
- Headphone Driver Maxim MAX97220A
- Capacitors Nichicon
- Software Sound Blaster Z-Series Software
- RGB No