Vue 3 Tutorial For Beginners

Posted on  by admin

In this article, you’ll learn the fundamentals of Vue.js. Even though the article uses Vue 3, the fundamentals apply to older Vue versions too.

We’ll cover how to:. create a Vue application with Vue CLI.

use conditional rendering. make use of dynamic CSS.

handle user inputs and events.

Computed Properties

use methods and computed properties. use HTML attribute binding. We’ll start by creating a skeleton application with the CLI.

The Vue command-line interface allows us to create and configure new Vue projects from scratch.

That is, instead of adding packages and configurations ourselves, the CLI does that for us.

Let’s install the Vue command-line interface. The tutorial assumes you don’t have Vue CLI installed on your machine.

List Rendering

To install it, run the following command:. Alternatively, you can install it using Yarn as follows:.

Once you’ve run any of the above commands, the installation starts, and it will take a few seconds or minutes.

Once the installation finishes, you can create projects with the following command:.

Once we’ve run the vue create command, we’ll be prompted with a handful of questions.

The purpose of these questions is to configure the project to suit our needs.

Figure 1: The Vue CLI welcome screen. Figure 1 above shows the welcome screen we get when we run vue create your-project-name.

Dynamic CSS

We then have to choose between three different options:.

create a default Vue 2 project. create a default Vue 3 project. manually select features.

The first two options will install a default Vue project for us.

However, we don’t want a default project.

For this tutorial, we’ll manually select the features for our project.

Once we choose the third option, we’ll get a series of questions.

Figure 2 above illustrates what we see when we choose the third option — manually select features.

We can pick what features we need in our project, such as:. adding unit and E2E testing to our project.

choosing a linter/formatter for the project.

adding options such as Vuex, TypeScript, Router and so on .

After that, we’re prompted to choose a Vue version for our project.

For this tutorial, I recommend choosing Vue 3, as pictured below. Figure 3: Choosing a Vue version in Vue CLI. Lastly, we’ll need to answer more questions based on the features we select in the first step, as shown earlier in Figure 2.

Before going further, I want to make sure we’re on the same page:.

Vue 3 Tutorial For Beginners

Run vue create vue3-fundamentals in your terminal. Choose “manually select features”.

Untick all features except Babel.

For this tutorial, we don’t need any extra features.

Choose Vue version 3. Choose “In dedicated config files” when it asks you where to place the config for Babel, and so on.

Don’t save the preset for future projects. After following the above steps, the project structure should look like the one in Figure 4 below.

That’s it with the project configuration! Now we’re ready to work on it and learn Vue!

If you want to see a more comprehensive article about the CLI, check this Vue CLI article.

There are some things we don’t need in the application.

First of all, go to src >components and delete the HelloWorld.vue component.

Now go to the App.vue file and remove all the references of HelloWorld from the file.

Also, remove the image with the Vue logo. Lastly, modify the export default {} code block.

See the complete code of App.vue below:. Set up a title property and display it in the template.

The first concept we’ll cover is how to render lists in a Vue application.

However, before we can do that, we need a list.

Open the file App.vue and add the following array:.

In the above code snippet, we added an array of objects.


Each object represents an individual task, and each task contains the following:. an ID: we can identify each task by its unique ID.

a name: it describes what the task is about. finished field: it represents whether the person finished the task or not.

The next step is to loop over the array and render it on the page. In Vue, we can loop over lists with the v-for directive.

The v-for directive has the form of task in tasks, where each task represents an individual item in the array, and the tasks represents the array.

We can see the v-for directive in action in the code snippet below:. We can render each item or task using the Mustache notation.

We use the Mustache notation by using those double curly braces. At the moment, it only displays the ID and the name of the tasks.

But we could also show whether it’s finished or not as follows:. However, we’ll use that field for other purposes later in the tutorial.

If we save the code and run the application, we should see something as follows:.

Figure 5: List rendering in Vue with the v-for directive. You can see that the tasks are rendered on the page, and each one has an ID and a name.

You may have noticed the following bit of code:.

It’s recommended we use the :key attribute when we loop over lists. The reason is so that each DOM element has a unique key.

Last Touches

Thus, Vue can track each node’s identity to reuse and reorder existing elements.

As a result, it also improves the performance of the application.

Usually, we use the item’s ID for the :key attribute, like in the above example.

Check this gist to see how the App.vue file should look up to this point.

There are occasions when we want to display something on the page based on a specific condition.

Thus, we can use the v-if directive to render a piece of code based on a condition. The block of code is rendered only if the expression provided returns a truthy value.

For instance, in the application we’re building in this tutorial, we might want a Delete task button to show after we finish a task.

Thus, we can delete a task when we’re done with it.

Let’s add the Delete task button. Go to the App.vue file and add the following code in the unordered list:.

Creating the Application with Vue CLI

You can see the new div with the v-if directive. Its purpose is to check if the task is finished.

If the task is completed, it shows the delete button.

If the task isn’t finished, the button is hidden. Go and change the finished field on any task from the task array to true.

After that, refresh the application, and we should see the delete button.

If you followed all the steps, this is what you should see:. Figure 6: Vue conditional rendering. The v-if directive is handy when we want to render something based on a condition.

Before moving on, it’s important to note that we can use v-else-if and v-else too.

For instance, we could have something similar to this:.

You can see how powerful conditional rendering is. However, for this tutorial, we’re using only the v-if.

Up Next

Check this gist to see how the App.vue file should look up to this point. The next step is to handle the user input.

First of all, go to the App.vue file and add the following HTML code under the application title:.

In the above code snippet, we add a text input that allows users to add new tasks.

Also, you’ll note the v-model directive. The v-model directive enables us to create two-way binding between the input field and the application state.

(You can learn more about v-model in “Understanding the New Reactivity System in Vue 3”.).

Before we can try out the code, add the newTask field in the Vue instance as follows:.

If we run the application and type anything in the input field, we’ll see the text appearing under the input field.

In the code above, we added

{{ newTask }}

in the HTML code, which represents the “newTask” field.

Thus, it gets updated and rendered on the page whenever we add anything in the input field.

It appears under the input field. Check this gist to see how the App.vue file should look up to this point.

Handling User Input

Before learning about handling user events, we need to learn about methods. The reason is that we’ll use methods to handle those user events.

All Vue instances have a property called methods, where we add all our methods.

For example, we’ll add a button that allows us to add tasks.

Thus, we encapsulate the logic for that button in a method, and we add it to the methods field. Open the file and add the following code after data():.

The above code only adds a task if the user entered something in the input field and then clears the field.

That is to prevent entering empty strings into our tasks list.

Now, we can use the addTask() method as we would in any other application.

Preparing the Application

We call the method, and the method will run, which is precisely what the next step is about.

Be aware: The application will have two more methods:. finish a task (which toggles a task on and off). However, I excluded them from the above code snippet for readability purposes, but you will see them in the gist.

You can see this gist with the complete code for App.vue up to this point. Now that you know what methods are about, it’s time to learn about handling user events.

For instance, what happens when the user clicks on the Add task button?

We can add an event listener to that button. In Vue, we can listen to events with the v-on directive. When an event such as the user clicking a button is triggered, the application runs the specified method.

Let’s see it in action. Go to the App.vue file and add a button under the input field.

We should have the following code:. Observe the @click="addTask" code.

The v-on directive has a shorthand symbol, which is the @ symbol. Thus, instead of writing v-on:click, we can write it as shown above.

Clicking on the Add task button triggers the method addTask(), which adds the task. Therefore, with the v-on directive, we can listen to user events and call a specific method when they are triggered.

Figure 8: Our disabled button. In Figure 8, you can see the newly created button. At first, it’s disabled, but once we start typing, it works!

See this gist with the complete code for App.vue up to this point.


Another handy feature in Vue is computed properties. They’re similar to methods, except that they should not mutate data.

However, the computed properties are great for manipulating data and reusing it across our application.

For this application, we’ll add two computed properties:.

One that returns the number of all tasks. One that returns the tasks’ array in reverse order.

We need it to show the latest tasks at the top of the list. Thus, in App.vue, add the following code under the methods property:.

You may have noticed that the latest() computed property returns a new reversed array.

As mentioned previously, a computed property should not mutate the existing data.

Also, when we use computed properties, it’s important to use the return keyword.

Handling User Events

If we don’t return stuff, it won’t work! Now we can use the newly created properties.

In our template, find the “Add a new task” section and add the following line underneath:.

The above line displays all the tasks in our list. Also, it determines when to use “tasks” or “task” based on the number of tasks.

Lastly, go to the piece of code where we loop over the array of tasks and change task in tasks to task in latest.

This is how our code should look now:. We now loop over the latest, and we also have an “index” field now.

The new field is used to show the position of the tasks in the list. Figure 9: Computed properties in action](computed-properties.png. Figure 9 illustrates the computed properties in action.

You can see that it shows the total count of tasks, and it also displays the tasks in the order they were added.

Share This Article

Before moving further, I want to emphasize again that they’re similar but different.

We should use methods to mutate data and use the computed properties for the presentation layer.

Mutating data in the computed properties can result in bugs that are hard to spot.

Check this gist to see how the App.vue file should look up to this point. In Vue, we can bind HTML attributes to Vue data with the v-bind directive.

That is, we can use dynamic values rather than hardcoded values for our attributes.

Conditional Rendering

Let’s make use of the attribute binding by adding a logo. Go to the and add two new fields, logoURL and logoCaption.

Our code should look as follows:. Then, in the same file, add the following HTML img element above the application title:.

Observe the colons in the :src and :alt attributes.

They’re the shorthand of v-bind. Thus, instead of writing v-bind:src, we write it :src.

Let’s say we use the logo in multiple places without having a separate component for it.

That means copy–pasting the same img tag in multiple locations.

If we want to change the logo, we’ll have to make changes in many places.

Attribute Binding

However, by using the attribute binding, we only have to make one change — in the Vue instance.

The image below illustrates one example — with the img element. However, we can use the attribute binding with other HTML elements too.

For instance, we could use it with the href element as well. Figure 10 illustrates the image in action!

Check this gist to see how the App.vue file should look up to this point. In Vue, we can use dynamic CSS.

That means whether a class is used or not is determined by a data property.

An example from the to-do application would be to add the class strikeout when the task is finished.

Go to the App.vue file and add the :class attribute after the @click attribute.

See the code below:. Also, at the end of App.vue, add the following bit of CSS:. So, what happens now?

In the above code, we added a user event as well — @click="finishTask(task)".

That means we can click on the task to finish it.

The method finishTask(task) toggles the finished field to true/false.

If the finished field is set to true, the strikeout class is added.

Dynamic CSS in Vue. Figure 11 illustrates what happens when we click on the task.

Thus, the dynamic CSS is great for scenarios like this. It’s important to note that, if we want to add multiple dynamic classes, we can use the array notation.

We can do it as follows:. Thus, this way, we can add multiple dynamic classes based on multiple conditions.

Moreover, we can add static classes in the array. See simple-class above. Check this gist to see how the App.vue file should look up to this point.

Two things are left to finish the application:. allowing the user to add a task by pressing the enter key on their keyboard.

making the delete button work. Open the file App.vue and find the input field. After you find it, add the following code:.

You’ll notice @keyup.enter, which calls the method addTask when the user presses the enter key.

Secondly, find the delete button in our application and add the following code:.

Now it listens for a click event, and whenever the Delete task button is clicked, it will trigger the method removeTask.

It also passes the ID of the task, so it knows what task to delete. Now we can enter tasks by pressing the enter key, and we can also delete tasks.

Check this gist to see how the App.vue file should look up to this point.

Well done for building your first application!

From here, you’re ready to dive deep into Vue components, Vue Router and other concepts!

You can find the whole application in this “final-app.vue” gist. If you want to try it out, simply copy all the code into your App.vue file.

Want to master The Vue 3? Then here is the list consisting of The Best Vue 3 Tutorial for beginners.

Before we start the collection let’s know why VueJS getting Popular and why you need tutorials.

VueJS is lightweight, easy to learn, and pleasant to write in.

Why VueJS Is Good For Beginners To Start With?

Besides, it is one of the powerful and flexible frontend frameworks.

It has familiar templating syntax and use of components, integrating or migrating existing projects to Vue is faster and smoother.

For this reason, Vue. js is a good option for startups, as well as it is useful in large-scale applications.