Macbook Doesn't Turn On

Posted on  by admin

Make sure that your Mac is connected to AC power. If it doesn't have a built-in display, make sure that your external display is connected to power, connected to your Mac, and turned on.

Press and hold the power button on your Mac for at least 10 seconds, then release.Every Mac has a power button. On notebook computers that have Touch ID, press and hold Touch ID.

If you see no change on your Mac, press and release the power button normally. If your Mac now turns on but stops at some other screen during startup, follow the steps for when your Mac doesn't start up all the way. If your Mac still doesn't turn on, please contact Apple Support.

When your Mac won't load or hangs on startup, it’s not the end of the world. You still have pretty good chances of fixing it, even without a technician’s help. Before you read next, check if your Mac is plugged in.

Your first guess should be your Mac has run out of battery. If it’s not the case, you are welcome to try some of the following easy tips. Here are six simple tips to try if your MacBook doesn't turn on.

Carefully examine the cable along its full length to see if the charger is intact and all connections are in place. Also, check the AC power socket is working. To isolate the source of the problem, look into the following:. Does your Mac make any noise?

If the fans are working, but you can’t hear any other sounds, this might indicate logic board failure. Could it be the display? Press the Caps Lock to see if it lights on. If it glows, then your display is probably off.

Solution 2: Reset PRAM/NVRAM

Sometimes your Macbook wouldn’t start because of a broken application that affects the startup, quite possibly, antivirus software.

  • To solve the issue, uninstall the unwanted app with CleanMyMac X (or a similar app) while in safe mode.
  • The safe mode limits the macOS to its most basic functions while allowing you to recover your Mac.
  • Sometimes it’s the single most effective solution when your Mac won’t turn on or continuously crashes.
  • To start up your Intel-based Mac in safe mode:.
  • Shut down your Mac and wait 10 seconds. Restart your Mac and press the Shift key.
  • Release the Shift key after the login window shows up.
  • To start up your Mac computer with Apple silicon in safe mode:.

Shut down your Mac and wait 10 seconds. Press and hold the power button until the startup options window shows up. Select a startup disk. Press the Shift key and click Continue in Safe Mode. Release the Shift key. Did your Mac wake up? Congrats, you’re in safe mode. At this point, you at least have some freedom of action to investigate and troubleshoot the issue.

How to fix a Mac that won’t turn on

While in safe mode, you might try running a couple of maintenance utilities. I've been using CleanMyMac X for some years now because of its Maintenance tool, which can help fix performance issues on your Mac. Launch CleanMyMac (you can get its free version here). Go to Maintenance. Check "Run Maintenance Scripts" and "Repair Disk Permissions." NVRAM is a small amount of memory on your Mac that contains certain settings, such as sound volume, display resolution, kernel panic information, and your startup disk selection.

Solution 3: Reset SMC

If you experience issues with booting your Mac, try resetting NVRAM. Shut down your Mac. Startup your Mac and press and hold Option, Command, P, and R keys.

  • Release the keys after the second startup sound or when the Apple logo shows up.
  • The common issue reported on many Apple forums is Mac’s screen going black on startup. This is typically followed by a recurring “Reset Password” message.

The problem appears to be somehow concerned with the battery power circuit with Mac failing to light up the screen.

  • There is a fairly simple solution to it, though, quite an odd one — involving a flashlight or a lamp. The trick works because your login screen is still there, but you can’t see it.

Shine the flashlight through the Apple logo on the back of your screen. Bringing this extra light should help you see the login icon, and you’ll be able to put the cursor in the right spot and log in.

FAQ for when a Mac won’t turn on

The screen should light up normally right after that. A variant of this solution is to shine a flashlight across the screen from left to right (on the front side of the screen). Try this in a dark room for greater effect. System Management Controller is responsible for many ground-level functions of your Mac.

  • Among those are battery settings, display reactions, and specifically the Power button functions. Use the following technique to reset SMC if your MacBook won’t load. Shut down your Mac. Press and hold the Control-Option-Shift keys together.
  • Hold the three keys for 7 seconds, then press and hold the power button. Your Mac will turn off. Keep holding all four keys for another 7 seconds.
  • Startup your Mac after a few seconds. To find out if your Mac has a T2 chip, go to the Apple menu > press Option key > System Information.

Select either Controller or Bridge. If you see "Apple T2 chip," your Mac has it. Shut down your Mac, then unplug the power cord.

Mac won't turn on? Try these tips

Wait 15 seconds, and plug the power cord back in. Wait 5 seconds, then turn on your Mac. Shut down your Mac. Remove the battery. Press and hold the power button for five seconds. Put the battery back in. Startup the Mac. Shut down the Mac.

  • Press Shift-Control-Alt (Options), and, while holding them down, press the power button. Hold all those buttons down for ten seconds, then release them. Press the power button to start up the Mac.
  • Shut down your Mac. Pull out the power cord and wait for 15 seconds. Put the power cord back in. Wait five seconds, and then press the power button to start up your Mac. If the issue repeats and your Mac won’t turn on again, you can try some of these:.
  • Set your Mac back using Time Machine. Reinstall the operating system. Use Disk Utility to recover your drive. Run some dedicated Mac maintenance app. All these options are available via Recovery mode—not to confuse with the safe mode—and to enter it, you’ll need to press a few spell-invoking special buttons once again.
  • Needless to say, they are of no use if your MacBook won’t load in the first place. Go to Apple menu > Restart. Immediately press and hold Command-R. Don’t release the keys until you hear Mac’s startup sound or until the Apple logo appears.
  • Give your Mac a bit of time to load, and you’ll be taken to Utilities. From there on, you’ll see several options. Putting hardware-related issues aside, there would still be many explanations for your Mac's misbehavior.
  • But to give you a perspective, here are a few more ideas to check:. Corrupted caches: critical system files from the boot sector are corrupted. Incompatible Login Items: some apps may affect the boot process.
  • Broken hard disk permissions: conflicting user accounts. Luckily, all these problems can be fixed using just software solutions. To get a health check for your Mac, start with a simple maintenance tool for Mac — a program of CleanMyMac X type will do.
  • It could help you locate hidden junk files and detect various hard drive errors which prevent your Mac from booting up.

Most often than not, a quick digital garbage cleanup will do the job. CleanMyMac X is available for a free download here.

If You Want to Rescue Your Mac When Your MacBook Won’t Turn on

OK, that’s all there is to it. Feel free to share this article if you found it helpful. Do you know what to do when your iMac won’t turn on, MacBook Air won’t start, or MacBook Pro won’t boot? MiniTool Software will show you some methods that can effectively solve the issue you are facing. Besides, if you want to recover data from your Mac computer, you can try Stellar Data Recovery for Mac.

Many situations can cause your iMac won’t boot, MacBook Air won’t turn on, or MacBook Pro won’t start. You must want to make your computer work normally again.

  • To help you solve the issue, we collect some solutions that are suitable for most macOS. We will show them in this post. You can try them to help you out.
  • Why your Surface Pro won’t turn on or wake up from sleep? Do you know how to make it back to normal? In this article, we will show you some useful solutions.
  • Make some simple checks. Reset PRAM/NVRAM. Use Disk Utility in macOS Recovery. Restore Your Mac from Time Machine Backup. Reinstall macOS. At times, iMac/MacBook Air/MacBook Pro won’t turn on happens due to some simple reasons.
  • For example, you are using a wrong or damaged cable or adapter. Or perhaps you don’t power on the device properly.
  • So, let’s first make some simple checks. Press the Power button for your Mac computer and then listen to the sound it makes including the sound from the fan, the hard drive, and other startup sounds.

At the same time, you need to watch the lights from a backlit keyboard, caps lock key, and sleep indicator light. If you can’t hear the sound and see the lights, it means that your Mac has no power.

Solution 6: Reinstall macOS

Then, you need to check the power connection issue. The first thing you need to check is the power outlet. You can connect another device like a lamp to the power outlet to see whether it can work. If the power outlet is OK, you can check whether your MacBook is plugged incorrectly. You can just unplug and then re-plug the cable and adapter to have a try. Besides, you can also perform a power cycle by pressing and holding the Power button for about 10 seconds and then releasing it.

If you are using a laptop, you need to make sure that the battery is charged. You can charge your Mac laptop for a while and then press the Power button to see whether it can boot normally.

You can go to check whether the cable and adapter are damaged or you are using a wrong cable and adapter.

  • You can try another supported cable and adapter to see whether you can boot your MacBook normally.
  • Or perhaps you mix the cables and adapters you have, and you use an incorrect cable and adapter for your MacBook. Just make a check to rule out this issue.
  • If you are using an external display, you need to guarantee that the display is turned on successfully.

For example, you can check the power cable and the power button.

  • You also need to turn on the brightness for your Mac display.
  • The connected accessories can also cause the Mac won’t boot issue.
  • You can disconnect all accessories and then boot your Mac again to see whether everything goes back to normal.

Bottom Line

If external hard drive freezes computer when plugged in, how to fix?

  • We introduce some solutions in this post, and you can choose one to help you out.
  • If your iMac/MacBook Pro/MacBook Air won't turn on but is charging, there should be some internal issues.
  • We will show you some other tips to get rid of this issue. You can keep on reading.

Why is my Mac not turning on?

NVRAM, which is also known as nonvolatile random-access memory, is a small amount of memory that can be used to save certain settings like sound volume, display resolution, startup disk selection, time zone, and recent kernel panic information, and access them quickly.

  • PRAM, which is also known as Parameter RAM, is used to store similar information as NVRAM. Some users report that they solve MacBook not turning on by resetting PRAM/NVRAM.
  • This method can’t always work. But you can have a try. Press and hold these four keys at the same time: Option, Command, P, and R, and then turn on your Mac computer.

Solution 4: Use Disk Utility in macOS Recovery

Release the four keys about 20 seconds later. During this process, Your Mac computer may restart. If your Mac can play a startup sound, you can release these four keys after you hear the second startup sound. If your Mac computer is using the Apple T2 Security Chip, you can release the keys when you see the Apple logo appears and then disappears for the second time.

  • After resetting PRAM/NVRAM, your MacBook should start up normally. If not, you can try the next solution. The full name of SMC is the system management controller.
  • Resetting it can solve certain problems related to power, battery, fans, etc. You can try this method to solve the Mac won’t boot issue. If you are using a notebook, you can follow these steps to reset SMC:.

Unplug the power cable and then re-plug it to your Mac. Press and hold Control-Shift-Option at the same time for about 7 seconds. Then press and hold the Power button. Release these three keys and the Power button. Reboot your Mac computer. If you are using a desktop Mac, you can follow these steps to reset SMC:.

MacBook Won’t Turn on FAQ

Unplug the power cable and then re-plug it to your Mac about 15 seconds later. 5 seconds later, press the Power button to turn on your Mac. If your MacBook Air/MacBook Pro still won’t start up, the next solution may be helpful. You can also use Disk Utility to fix your Mac issue. Since your MacBook won’t turn on, you need to run Disk Utility in macOS Recovery.

  • This post shows you how to use Disk Utility on Mac to partition, wipe, repair, restore, and copy a drive.
  • Mac data recovery software is also introduced here. Here are the things you should do:. Press and hold the Power button for seconds to make sure your Mac computer is turned off completely.
  • Press and hold the Command and R keys immediately while you turn on your Mac. Release the keys when you see the Apple logo.

Type your password if it prompts. When you see the macOS Utilities interface, you need to select Disk Utility and click Continue to access it. Locate your Mac drive and then select First Aid.

Solution 1: Make Some Simple Checks

Follow the guide to repair the drive. If you have used Time Machine to back up your macOS and files when your Mac still works normally, you can restore your Mac from a Time Machine backup to make your Mac go back to a normal state. Connect the drive that saves the backup file to your Mac.

  • Use the method mentioned in the above solution to enter macOS Utilities. Select Restore from Time Machine Backup and click Continue.
  • Follow the on-screen guide to restore your macOS and files. If all the above methods don’t work for you, you may need to reinstall macOS.
  • Since your MacBook Pro/MacBook Air won’t turn on, you still need to access macOS Recovery to do the job.
  • During the whole process, you need to make sure that your network connection is enabled. Access macOS Utilities. Select Reinstall macOS and click Continue.
  • Follow the on-screen instruction to complete the macOS installation. During the process, you should not put your Mac to the sleep mode or close the lid.

If your iMac/MacBook Pro/MacBook Air won’t turn on and you don’t want to lose your files in your machine, you can use a dedicated Mac data recovery software to rescue them. You can try Stellar Data Recovery for Mac.

Solution 5: Restore Your Mac from Time Machine Backup

This software is specially designed for macOS. The Professional or above edition of this software allows you to create a bootable drive with which you can recover data from an unbootable Mac computer. You can go to the MiniTool official site to get this software. In this post, we will show you some best and free Mac Data Recovery software that is useful for you to get your lost and deleted Mac data back.

  • Before using this software to recover data from your MacBook that won’t boot, you need to prepare a USB drive of a min 8 GB space to create a recovery drive. Besides, the drive should be empty or has no important data because the drive will be erased during the process.
  • Download and install this software on a normal working Mac computer.
  • Open the software. Register the software using the license key you receive.
  • Click the Click here link that is at the left bottom side of the software. Select the USB drive and click the Create Recovery Drive button to start the creating process.
  • When the process ends, click OK on the pop-up interface. Since your MacBook is unbootable, you need to save the files to an external drive that has enough space.

Just prepare such a drive and connect it to your Mac. Connect the USB recovery drive to your unbootable MacBook.

Press the Power button on your Mac and then immediately press & hold the Option key at the same time. Release the key when you see the startup manager screen. Select the USB recovery drive and press Return.

5. Reset System Management Controller (SMC)

6. Try Recovery mode when the Mac won't load

Then, your MacBook will boot from this recovery drive. When you see the macOS Utilities interface, you need to select StellarDataRecovery and click Continue. You will see the software interface. Then, select the data types you want to recover and click Next to continue. Select the drive you want to recover data from. If you want to perform a deep scan, you need to enable this feature. Then, click Scan to continue.

When the scanning process ends, you can see the scan results. Then, you need to select the files you want to recover and click the Recover button. A new interface pops up. You need to click Browse and then select the external hard drive you want to save the selected files.

Check the Display

At last, click Save to store the files to the drive. Now the files are safely saved to your specified drive. From this article, you know how to fix MacBook won’t boot and how to recover data from an unbootable Mac computer.

Step 1: Create a Recovery Drive

Should you have any related issues, you can let us know in the comment or send an email to [email protected]. We will reply to you as soon as possible.

You can press and hold the Control-Command keys while pressing the Power button to perform a force restart for your MacBook Pro.

Conclusion

Resetting SMC can solve the issues related to power, battery, and fans. It will not affect your computer hard drive and the files in it.

So, you can feel free to reset SMC when necessary. You can press and hold the Power button for seconds until it turns off. Press Option, Command, and Esc at the same time to call out the Force Quit Applications.

Select the app you want to quit and then click Force Quit to quit that app.

Despite the fact that a Mac is one of the most reliable computers, occasionally, it might not turn on. If you find yourself faced with this problem, this article is for you. Here, we will explain why a MacBook Pro/Air won’t turn on and how to fix it.

A MacBook does not turn on after a hardware upgrade

Tip 1 – How to prevent the problem when Mac won’t turn on. If your Mac won’t turn on, the reasons can be divided into software and hardware issues.

  • Software issues mean that your Mac won’t turn on due to system crashes, system update problems, incorrect installations of new applications, or viruses.
  • For hardware issues, Macs can have problems because of mechanical damage, incompatibility of components, power problems, short circuits, and so on.
  • Important note!If your MacBook falls into water or you fill it with any liquid – for example, tea, coffee, water, or alcohol – we recommend that you immediately contact the nearest Apple service center for diagnostics and to fix the problem.
  • Depending on the reason your MacBook won’t turn on, showing the black screen, you will have to take different actions to fix the problem.
  • The MacBook has problems with the power supply system. There are incompatible components, such as the RAM memory and SSD.
  • The MacBook has a defective battery charging device.
  • The MacBook has overheated. The MacBook is connected to external devices (external drive, flash drive, printer, and other peripheral equipment), which is causing problems.

Read also: “Why is my Mac fan so loud and overheating?“. If your Mac won’t turn on due to software problems, you can try to fix it by yourself. In the case of mechanical hardware damage, you will have to contact a service center for professional help. Below, we will explain what to do in most common cases when your Mac won’t turn on.

Here are possible issues for why your Mac is not starting:

If the power supply is out of order and the battery is not charging, then of course your MacBook will not turn on. Check the charging cord for kinks, especially near the plug. If this is the issue, try charging your MacBook with another charging unit. If a MagSafe connector is dirty, has oxidized over time, or is simply clogged with dust and dirt, then your MacBook will not charge and will not turn on as a result.

1. Check your charger’s cable

Check the Magsafe connector, as well as the charging cord for kinks, especially near the plug.

  • Clean up the connector, charge it, and turn it on. If you spilled any liquid on your MacBook, it can lead to various damages.
  • For example, it can cause the failure of the keyboard or even short circuits on the MacBook motherboard.

In this case, you have to disconnect from power immediately and wipe the keyboard with a dry cloth or tissue.

  • If your Mac still won’t turn on, you should immediately take it to the nearest Apple service center. Did your Mac work before installing new components like RAM, hard drive, or SSD, and now it won’t turn on?

Most likely, this is because the components were not firmly seated in the connector, or they do not match the specifications. Review them again, rearrange the new module, and try to start your Mac.

Check Your Power Connection

If this doesn’t help, put the old components back. If a MacBook does not turn on and the problem is not connected with the reasons mentioned above, try to reset its System Management Controller (SMC).SMC is a microcircuit on a Mac that is responsible for the operations of all power supplies in the system, for turning on the MacBook, and for various operating modes.

  • It works constantly – even when a Mac is turned off. If something goes wrong with the SMC, it can lead to various system issues, including not turning on. Resetting the SMC can help solve this issue.
  • Note: depending on what type of Apple computer you use (MacBook, iMac, Mac mini), you will follow different steps to reset the SMC. Also, this option will not work on M1 Macs.
  • Apple’s chip doesn’t have a system management controller. To reset the SMC on a MacBook:.

Disconnect your MacBook from everything but the power. Press and hold the (left side) Shift+Control+Option shortcut and the “Power” button.

4. Fixing a Mac booting to a black screen

The MacBook will immediately turn on and then turn off. After that, it should boot normally. To reset the SMC on a iMac. Shut down your iMac. Press and hold the power button for 10 seconds. Then release it. Wait a few seconds and restart your iMac.

  • The problem should be fixed and your iMac will turn on. If not, do the following: . Unplug the iMac’s power cord. Wait 15 seconds. Reconnect the power cord and wait 5 seconds.
  • Turn on the iMac. If this doesn’t help, try the next tip. If you still cannot turn your Mac on, most likely the problem is affecting your hard drive. In this case, try to run your Mac in Recovery Mode.
  • Here is how to run a Mac in Recovery mode:. Press the power button and, after the startup chime, press and hold the Command+R shortcut. You will see the macOS Utilities window. Select Disk Utility.
  • Select your Mac’s hard drive in the left sidebar. In the popup window, click the Run button. The system will start scanning your drive for issues. If nothing critical is found, restart your Mac in its usual mode. The problem should be solved.
  • Read also: “How to fix a Kernel Panic error on Mac.“. Sometimes, a Mac won’t turn on after a macOS update. This can happen if the Mac has not been updated for a long period of time. New drivers and updates are installed on the old version of macOS, and after the resumption of work, the Mac does not turn on or goes into an eternal reboot.
  • In this case, booting a Mac in Safe mode can help to fix the issue. Here is how to boot your Mac in Safe mode:. Press the Power button on your Mac. As soon as you hear the startup chime, press and hold the Shift key.
  • You will see the login screen. Log in to your user account. Go to the Apple Menu and select Restart from the drop-down menu. After safe boot, your Mac should start as usual.
  • There are many reasons why a MacBook Pro, MacBook Air, or iMac won’t turn on.

Damage to power circuits, liquid flooding, dust clogging, and other reasons can cause hardware and software problems.

Power supply damage

Disconnecting from a MacBook external peripherals, such as an iPhone, printer, webcam, flash drive, and so on can help to boot a Mac. Also, remember to maintain your Mac and regularly clean up all types of junk files in order to prevent future problems with rebooting a Mac. You can do this with a powerful software tool, MacCleaner Pro.

You can download it for a free trial with unlimited options. First of all, you should try to press and hold the Shift+Control+Option shortcut and the Power button for a few seconds.

  • This will reset the SMC and your Mac will turn on. If not, you should determine the reason your Mac won’t turn on and fix the issue. If your Mac is charging but you can’t turn it on, it means that the problem is not connected with the battery or charging cable.
  • Other reasons that can cause the problem include: there are incompatible components in your Mac, the computer has been overheated, external devices that are connected to your Mac are causing the problem, and more.
  • If you have a MacBook Pro (2016 or later) the power button is in the top-right corner. If you have a MacBook Air (2018 and later), you will not find a physical Power button. In the newest models of MacBook, the power button is embedded in the Touch ID button, which you will find on the right next to the Touch Bar.
  • Make sure that your Mac is connected to AC power. If it doesn't have a built-in display, make sure that your external display is connected to power, connected to your Mac, and turned on.
  • Press and hold the power button on your Mac for at least 10 seconds, then release.Every Mac has a power button.

On notebook computers that have Touch ID, press and hold Touch ID. If you see no change on your Mac, press and release the power button normally. If your Mac now turns on but stops at some other screen during startup, follow the steps for when your Mac doesn't start up all the way.

How to Fix MacBook Won’t Turn on?

If your Mac still doesn't turn on, please contact Apple Support. Make sure that your Mac is connected to AC power. If it doesn't have a built-in display, make sure that your external display is connected to power, connected to your Mac, and turned on. Press and hold the power button on your Mac for at least 10 seconds, then release.Every Mac has a power button.

On notebook computers that have Touch ID, press and hold Touch ID. If you see no change on your Mac, press and release the power button normally.

If your Mac now turns on but stops at some other screen during startup, follow the steps for when your Mac doesn't start up all the way.

  • If your Mac still doesn't turn on, please contact Apple Support.
  • After Mac shuts down, press the Shift + Control + Option key and then press the Power button at the same time. Hold the keys and power button for 10 seconds.
  • Now release all keys and press the power button again to turn your Mac on. The SMC is reset now.

If Mac has removable batteries, the steps will be:

  • Shut down Mac and remove the battery.
  • Press the power button and hold it for 5 seconds.
  • Now reinstall the battery and press the power button once more to turn on Mac.

Listen to the Sound and Watch the Indicator Light

From iMac Pro to Mini, the desktops will follow the steps given below to reset SMC.

  • Click on the Shut Down option from the Apple Menu.
  • After Mac shut down, unplug the power cord and wait for 15 seconds.
  • Plugin the power cord again and wait for 5 seconds more. Now press the power button and turn on Mac

Liquid ingress

To reset SMC on the desktop or notebook which has T2 chips, the steps are the same:

  • Shut down Mac from the Apple menu and after it shut down, press the Power button. Hold the power button for almost 10 seconds and then release it.
  • Wait for a few seconds more and then press the Power button to restart your Mac.

Unplug All Accessories

When the Mac does not boot normally, it is time to boot Mac in Safe Mode. Whatever you were doing that lead to the issue can be resolved by using this method. Plus, if Mac shows the signs of life but doesn’t get past the Apple logo, then booting in Safe Mode is a better alternative.

  • Restart your Mac and when it is restarting, press the Shift key. Hold the key until you get to the login screen with the Apple logo on it.
  • If the issue doesn’t happen in the Safe Mode, then try turning on Mac normally. When the issue doesn’t come back, it is usually a sign that the main cause was cache or directory issue with startup disk which gets fixed by the Safe Mode.

The Safe Mode runs a bunch of tests and boots the stripped-down version of macOS. It only loads the basic features, thus you can uninstall the apps that you think might be interrupting the system. You can also disable startup items, remove hardware, and undo the changes made recently in the system that might lead to this issue.

3. Reset NVRAM

If you tried booting Mac in safe mode and nothing is fixed, that means that the Mac safe mode is not working properly too. In this scenario, you can try resetting the Mac PRAM/NVRAM. It is the non-volatile Random Access Memory which Mac use to store some particular settings to provide quick access. The Parameter RAM (PRAM) also keeps similar information. Even the steps to reset PRAM and NVRAM are the same.

  • Shut down Mac and turn it on. Press the Option + Command + P + R keys together and hold them for about 20 seconds.
  • During this period, your Mac would appear as if it is restarting. When you hear the chime sound or when the Apple logo appears on the screen, you can let go of the keys.
  • When the Mac finishes starting up, you might have to open System Preferences and adjust the settings that were reset due to reset of NVRAM/PRAM.

Settings stored in NVRAM include the Sound volume, display resolutions, recent kernel panic information, and startup disk selection. All this will reset when you follow the above steps.

Restore from Recovery mode

Under unfortunate circumstances, you will face this issue only after you log in to a particular account. So, before you get to the macOS recovery, you must see if the problem still persists with other user accounts on Mac or not. If Mac still not starting up that means your last solution is to run macOS in recovery.

  • If another user account is already set up, you can simply log out of the present account from the Apple menu and login with another account.
  • If there is no account, then you can create a new one. Click on the System Preferences option from the Apple menu and choose the Users & Groups option.
  • Press the Lock icon at the bottom of the interface and enter the admin username and password.
  • Click on the Add button (+) and enter the field required for the account setup. Finally hit the Create account option and a new account will appear on the list.
  • Now go to the Apple menu and pick the Log out option. A login window will appear on the screen. Enter your name and password of the new account and see if the problem still exists or not.

If the startup issue doesn’t happen with the new account, then it must be related to some settings or files on your account. Therefore, you will need special help from the Apple Support website or simply try uninstalling useless applications from your Mac.

Step 2: Rescue Data Using the Recovery Drive

Last but not the least valuable fix for MacBook air not turning on with regular method is to try rebooting Mac into Recovery Mode. The macOS recovery is a part of the in-built recovery system of Mac. The utilities available in the Recovery Mode allows you to restore Mac from Time Machine, reinstall macOS, get help online, and to repair or erase disk using the Disk Utility feature.

  • Turn on your Mac and press the Command + R keys during startup. Keep the keys pressed until you see the Apple logo or spinning globe on the screen. The recovery mode startup is complete when you see the macOS Utilities on the screen.
  • Restore Mac from a past backup that exists on Time Machine drive.
  • Reinstall Mac operating system from the drive or Apple server to fix the issue.
  • Use the Safari browser to find help to resolve the issue with Mac. Get Online help section include the Apple Support website too.
  • Disk Utility feature allows the users to erase or repair the startup disk or any other disk. It can be used as firmware password utility or startup security utility, network utility, and terminal too.

Once you have resolved the issue, restart Mac normally and you can use it without any hassle.

All the solutions we discussed here are for particular situations. But if you can’t figure out the exact reason for the problem, then the best solution will be reinstalling Mac as it won’t delete any file from Mac.

Quick Navigation :

Boot up your Mac in Safe mode

MacBook Air is not starting? Well, don’t worry; you can’t fix it with the above methods. And if Mac still doesn’t turn on, then you might have a risk of losing your data files permanently. But Recoverit Mac Data Recovery can help you in this scenario too. With the help of this tool, you can create a bootable drive using another Mac to start the malfunctioning system. The software supports a Pre-installation Environment that makes it possible for the users to recover data from a Mac that doesn’t start.

Begin by downloading the software on another computer and create a bootable drive. Once the drive is ready to boot, connect it to the Mac that won’t start. Enter Boot mode on the Mac and follow the steps below to get the files back:

MagSafe connector problems

Reboot Mac in Recovery mode and launch the software. Specify a location on the drive and click on the Start button to initiate the scanning process.

Force resetting the SMC

The software will run a quick scan of the system hard drive and display the results on the screen. You can view the file according to the file type or file path.

If some files are still missing from the results, switch to the Deep scan mode for better results.

Check the Cable and Adapter

Select as many files as you want but make sure that you have a preview of those files. Press the Recover button at last and the file recovery process will start.

So, whether the Mac app is not working or the whole system isn’t turning on, you can still use Recoverit to retrieve your data from the drive. Although it will take a long time to restore that much data, it will be worthwhile.

To Wrap Up:

From now on, whenever Mac won’t start up, you know exactly what you can do about it. And if you somehow lose your data from the device because MacBook Air won’t turn on, then try Recoverit and recommend it to your friends too.

2. MacBook won’t boot? Start it in safe mode

Recover Your Mac
Fix Your Mac
Delete Your Mac
Learn Mac Hacks