Windows 10 Fresh Installation Download

Posted on  by admin

Follow these steps to create installation media (USB flash drive or DVD) you can use to install a new copy of Windows 10, perform a clean installation, or reinstall Windows 10. Before you download the tool make sure you have:. An internet connection (internet service provider fees may apply). Sufficient data storage available on a computer, USB or external drive for the download.

A blank USB flash drive with at least 8GB of space or blank DVD (and DVD burner) if you want to create media. We recommend using a blank USB or blank DVD, because any content on it will be deleted. When burning a DVD from an ISO file, if you are told the disc image file is too large you will need to use Dual Layer (DL) DVD Media.

Check a few things on the PC where you want to install Windows 10:. 64-bit or 32-bit processor (CPU). You’ll create either a 64-bit or 32-bit version of Windows 10. To check this on your PC, go to PC info in PC settings or System in Control Panel, and look for System type.

System requirements. Make sure the PC meets the system requirements for Windows 10.

Windows 10 Tips and FAQs

We also recommend going to the PC manufacturer's website for additional info about updated drivers and hardware compatibility. Language in Windows.

You'll need to choose the same language when you install Windows 10. To see what language you're currently using, go to Time and language in PC settings or Region in Control Panel. Edition of Windows. You should also choose the same edition of Windows.

Why Do I Get «invalid License Key, Please Input A Valid Key» Error?

To check what edition you're currently running, go to PC info in PC settings or System in Control Panel, and look for Windows edition. Windows 10 Enterprise isn’t available in the media creation tool.

Method 4. Migrate Windows 10 with Disk Cloning Software

For more info, go to the Volume Licensing Service Center. Microsoft Office products. If you just purchased a new device that includes Office 365, we recommend redeeming (installing) Office before upgrading to Windows 10.

To redeem your copy of Office, please see Download and install Office 365 Home, Personal, or University on your PC. For more information, check How to upgrade to Windows 10 on new devices that include Office 365.

Method 2. Download Windows 10 64/32 Bit ISO File

If you have Office 2010 or earlier and choose to perform a clean install of Windows 10, you will need to locate your Office product key.

For tips on locating your product key, check Find your Office 2010 product key or Enter the product key for your Office 2007 program. Using the tool to create installation media:.

Select Download tool now, and select Run. You need to be an administrator to run this tool.

  1. If you agree to the license terms, select Accept.
  2. On the What do you want to do?
  3. page, select Create installation media for another PC, and then select Next.
  4. Select the language, edition, and architecture (64-bit or 32-bit) for Windows 10.

    This table will help you decide which edition of Windows 10 you’ll choose:.

  5. Select which media you want to use: USB flash drive. Attach a blank USB flash drive with at least 8GB of space.
  6. Any content on the flash drive will be deleted.ISO file.

    Save an ISO file to your PC, which you can use to create a DVD.

After the file is downloaded, you can go to location where the file is saved, or select Open DVD burner, and follow the instructions to burn the file to a DVD.

How to Recover Data After Windows 10 ISO Installation (FREE)

For more info about using an ISO file, see Additional methods for using the ISO file to install Windows 10 section below. USB flash drive. Attach a blank USB flash drive with at least 8GB of space.

Any content on the flash drive will be deleted. Save an ISO file to your PC, which you can use to create a DVD.

  1. After the file is downloaded, you can go to location where the file is saved, or select Open DVD burner, and follow the instructions to burn the file to a DVD.
  2. For more info about using an ISO file, see Additional methods for using the ISO file to install Windows 10 section below.

    %HOMEPATH%

    After the installation media is created, follow the steps below to use it.

  3. After completing the steps to install Windows 10, please check that you have all the necessary device drivers installed.

    To check for updates now, select the Start button, and then go to Settings > Update & Security > Windows Update, and select Check for updates.

  4. You may also wish to visit your device manufacturer’s support site for any additional drivers that may be needed.
  5. Note: Drivers for Surface devices may be found on the Download drivers and firmware for Surface page.
  6. “Refresh Windows” tool is a new official program released by Microsoft to help users in performing clean installation of Windows 10 operating system.

    This tool will reset Windows 10 and will remove any extra app installed by the user or came pre-installed by the manufacturer in the PC.

  7. After resetting, it’ll install a clean copy of Windows 10.

So you’ll get a fresh clean installation of Windows 10 in your computer. If you remember when Microsoft released Windows 8 and Windows 8.1 operating systems, both the OS came with 2 new and very useful features: Reset PC and Refresh PC. “Reset PC” feature in Windows 8/8.1 works like “Reset to default” or “Restore factory settings” options present in mobiles, tablets, etc.

It formats the drive and clean installs Windows OS. It doesn’t keep any personalized setting, documents, installed apps, etc. “Refresh PC” feature in Windows 8/8.1 repairs Windows OS.

It doesn’t remove everything from the PC. It reinstalls Windows but keeps your personal files, settings and apps. You can read more details about these features at following link:.

Conclusion

Method 3. Run Windows 10 Media Creation Tool

With the release of Windows 10, Microsoft removed “Refresh PC” feature from the OS.

Windows 10 comes with “Reset this PC” feature only which can be considered as a combination of previous “Refresh PC” and “Reset PC” features. Now to bring the standalone “Refresh PC” feature back to Windows 10, Microsoft has released this new “Refresh Windows” tool which performs clean installation of Windows 10 in your computer and helps you in keeping your personal files in your computer.

SHORT INFORMATION:

At the moment this tool has been released for testing purposes and works on Windows 10 Insider Preview builds only. You must be using Windows 10 Insider Preview build 14342 or later to be able to use this tool.

It happens because Microsoft has released this tool in preparation for the upcoming Windows 10 Anniversary Update build which will be released next month if everything goes per Microsoft’s plan.

  1. This tool downloads the latest available build of Windows 10 from Microsoft servers, so you’ll need a working Internet connection to download Windows 10 setup ISO file of about 3GB in size.
  2. This tool will allow you to keep personal documents but it’ll remove all 3rd party software and store apps (modern or metro apps) which do not come bundled with Windows by default.
  3. It’ll remove all apps installed by the user or installed by the computer manufacturer (OEM) company.
  4. After performing clean install of Windows 10 using this tool, you’ll need to install all 3rd party software, apps and drivers manually.

    • At the moment only 3 languages are supported by this tool: English (EN-US), Chinese (ZH-CN) and Japanese (JA-JP).
    • You can download this official tool from following link:. This official tool might come handy when you are having problems with Windows 10 and want a fresh start.

    Sometimes the built-in “Reset this PC” feature doesn’t work properly, in such conditions this new tool will become very useful.

Hi zBernie, I am Rob, an independent and a 14 time and dual award MVP specializing in Windows troubleshooting and Bluescreen analysis.

DETAILED DESCRIPTION:

Please remember as independents we are not responsible for the development of Windows or the computer hardware and drivers. If you will work with me I will be here to help until the issue is resolved. As long as you login with the same Admin Account that is being used now the Digital Entitlement will activate Windows.

How to Free Download Windows 10 ISO 64/32 Bit Full Version

(And most newer computers have the Product Key in the BIOS anyway.) A Clean Install would be activated with the Digital Entitlement. Use the Windows 10 Media Creation Tool to create a USB Drive. <-- Click the "Download tool now" button which will give you the latest available version https://www.microsoft.com/en-us/software-downlo..Or for others - How to Prepare Bootable Install Media for Windows 10 - DVD, USB or SD Card https://answers.microsoft.com/en-us/windows/for..Start fresh with a clean installation of Windows 10 https://www.microsoft.com/en-us/software-downlo..Clean Install Windows 10 http://answers.microsoft.com/en-us/windows/wiki..Here to help, Rob ------ Standard Disclaimer: Those may be non-Microsoft websites.

The pages appear to be providing accurate, safe information.

Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products).

Windows 10 ISO 64/32 Bit Free Download Full Version – 4 Ways

Thoroughly research any product advertised on the site before you decide to download and install it. Please let us know the results and if you need further assistance. Feedback definitely helps us help all. You may recall that I mentioned hives in the opening paragraph of this article.

A weird thing happened to me last year as I was using the registry editor – a wasp flew into my office and stung me on my finger!

  • I’m not saying it came from a registry hive, but it was 2020.
  • How to enable the virtual keyboard (On-Screen Keyboard) in Windows 10… Now you can make whatever changes you need to make to the Windows Registry, with full understanding that you can undo them all any time you want.
  • Once backed up, you will feel comfortable changing almost any change.
  • As long as it was made within the backup, you can easily undo it.
  • It’s so bad Microsoft didn’t design Registry Editor to prompt you to back up before making changes – they really should be.

They must be out of their minds disabling Registry backups and System Restore. At a command prompt, run Perfmon /sys multiple times to open a view of each log file.

Insights Into Effective Dll Files Secrets

Use the Compare option to transparently overlay each log onto the first log. Run Windows Server Backup and start the Back up Once wizard. Save the backup to a shared folder on the network.

Method 1. Buy Windows 10 License from Microsoft

And it is impossible to collect them all since they are practically infinite. Type disk cleanup and open the app from the search result.

UEFI settings on Windows 10

See Manual disaster recovery of a remote Backup Exec server or remote agent on a Windows computer.

  1. That is what made the DPAPI system extremely vulnerable.
  2. Windows Password Recovery, for example, can decrypt a Master Key from its local backup and wouldn’t even need the user’s password to do that.
  3. And, finally, there goes the actual encryption of the source data.
  4. In Windows 7, data is encrypted using the AES256 algorithm.

    On the backup side of things, File History is the primary backup tool in Windows 8 and 10.

  5. It offers not just full backups, but also a way to restore previous versions of files.

    Normally you have to sit there carefully reading the path then clicking through each level after level after level of junk before finally getting to where you want to be.

  6. Even better, if you find you really like Registry Explorer, you can configure it to automatically replace the Windows Registry editor and be the default file handler for .reg file.

    If you would like to create a backup of a Registry key or Export the key for sharing with someone else, Right-Click the key and select Export, choose a name and add .reg as the format.

  7. You can also back up the Registry using freeware Regback or ERUNTgui.

    For example, the dllkit.com/dll/amd-ags-x64 following .reg file when opened in Notepad will look like the following with the location in bold and values underneath.

  8. RegCool is an Explorer-like search tool for editing information in your registry.

    RCleaner will search for any errors, invalid settings, obsolete or corrupt records, software paths that no longer exist, and many more data categories.

  9. Make sure you have:. An internet connection (internet service provider fees may apply).
  10. Sufficient data storage available on a computer, USB or external drive for the download.

    A blank USB flash drive with at least 5 GB of space or blank DVD (and DVD burner) if you want to create media.

  11. We recommend using a blank USB or blank DVD, because any content on it will be deleted.

When burning a DVD from an ISO file, if you are told the disc image file is too large you will need to use Dual Layer (DL) DVD Media.

UEFI settings on Windows 8.1

Check these things on the PC where you want to install Windows 10:.

  1. 64-bit or 32-bit processor (CPU).
  2. You’ll create either the 64-bit or 32-bit version of Windows 10 that’s appropriate for your CPU.
  3. To check this on your PC, go to PC info in PC settings or System in Control Panel, and look for System type.
  4. System requirements. See the system requirements before installing Windows 10.

    We also recommend that you visit your PC manufacturer's website for info about updated drivers and hardware compatibility.

  5. Language in Windows. You'll need to choose the same language when you install Windows 10.

    To see what language you're currently using, go to Time and language in PC settings or Region in Control Panel.

  6. Edition of Windows. You should also choose the same edition of Windows.

    To check what edition you're currently running, go to PC info in PC settings or System in Control Panel, and look for Windows edition.

  7. Windows 10 Enterprise isn’t available here.

    Please see the Volume Licensing Service Center for more information.

  8. Windows 10 is one of the easiest operating systems.

    It is a blend and update of Windows 7 and Windows 8 with some entirely new features that are easy to handle.

  9. If you do not have Windows 7 SP1 or Windows 8.1, you can still get a free Windows 10 full version.
  10. This post provides you with four effective ways to download Windows 10 64/32 bit full version for free.

    These methods will help you in obtaining Microsoft Windows 10 operating system full version for free.

  11. These solutions open a path for all Windows XP and Windows Vista users, as well as to get a free copy of the Windows 10 final version.

Here's the quick navigation of the solutions. Before you are going to download Windows 10 64 bit full version free, you must learn about the system requirements of Windows 10.

UEFI settings on Windows 7

Here's what it takes to install Windows 10 on your PC or tablet:.

  1. Latest OS: Make sure you're running the latest version—either Windows 7 SP1 or Windows 8.1 Update.
  2. Processor: 1 gigahertz (GHz) or faster processor or SoC. RAM: 1 gigabyte (GB) for 32-bit or 2 GB for 64-bit.

    Hard disk space: 16 GB for 32-bit OS or 20 GB for 64-bit OS. Graphics card: DirectX 9 or later with WDDM 1.0 driver.

  3. Display: 800 x 600. To find out which version you're running:.
  4. Press the Windows logo + R, type winver in the Run box, and then select "OK".

Almost 90% of computers are running on Windows operating system. In this part, you are going to learn four ways to download Windows 10 64/32 bit full version free.

Configure boot order using BIOS

Read on to get Windows 10 for your PC. To get started, you will first need to have a license to install Windows 10.

  1. Go to the Microsoft page to buy a copy of Windows 10 and install it on your PC.
  2. Once you have met the requirements to run Windows 10, follow the steps to download Windows 10 64/32 bit ISO file.
  3. Step 1.Download Windows 10 Media Create Tool. Create a Windows 10 installation media file like an ISO file, USB flash drive, or DVD.
  4. After you have created an ISO file, then you need to burn the Windows 10 64/32 bit ISO file to a blank USB with burning tools like Rufus.

    Then, insert the installation USB flash drive or DVD to your PC and boot your PC into BIOS.

  5. Go to the Boot Menu and select to boot from the USB or DVD media.

Follow the on-screen instructions to install Windows 10 for your PC. Microsoft provides a very useful Windows 10 Media Creation Tool for users to install Windows 10, or create a bootable installation USB drive, DVD, or ISO file to install Windows 10 on a different PC.

Disconnect non-essential peripherals

Download Windows 10 Media Create Tool. Run the Windows 10 Media Create Tool. Then, follow this guide to install Windows 10 from a bootable USB drive. If you have Windows 10 installed on an old PC, you can use Windows 10 cloning software to clone Windows 10 to a new SSD or HDD.

Then, insert the SSD or HDD into the new PC. Finally, the new PC will have Windows 10 installed. You can get more information from this video.

Windows 10 System Requirements for 32/64 Bit

Generally speaking, you won't be faced with data loss on your new PC after installing Windows 10. But if you are using an old PC to install Windows 10.

Create Windows 10 USB with Media Creation Tool

You will encounter data loss problems after a clean install. To get back lost files, you need to run EaseUS free data recovery software.

  1. It's a tool that recovers lost files, pictures, documents, and videos, after deleting, formatting, partition loss, virus attack, and other data loss scenarios.
  2. Download and install this tool to recover data in Windows 10. Run EaseUS Data Recovery Wizard. Choose the drive where you lost files and start scanning.
  3. This software allows you to recover lost data from all devices, including HDD, SSD, USB drive, SD card, pen drive, camera, etc.
  4. Browse the full scan results. You can choose the file type you need by clicking on the file type filter.
  5. EaseUS data recovery software supports 1000+ file types like photos, videos, documents, emails, audio files, and many more.

    Select the files you want to preview.

  6. Click "Recover" and set a storage location to save the recovered data.
  7. Here are some additional tips that may do you a favor in troubleshooting Windows 10 issues.
  8. How to check Windows 10 system type? If you want to check if you've downloaded and installed the 64 bit or 32 bit of Windows 10, follow these steps:.

    Click the Start menu, type about, click "About your PC".

  9. Then you can see your system type under Device specifications.

    How to upgrade Windows 10 32 bit to 64 bit?

  10. If your computer meets the system requirements, you can refer to upgrading 32 Bit to 64 Bit in Windows 10 without losing data.

    How to stop Windows from the automatic update?

  11. What if your Windows 10 upgrade to the newest version without asking you?

    You can disable Windows 10 automatic updates in every way.

  12. How to make Windows 10 up-to-date?
  13. You can download Windows 10 update from Microsoft or upgrade it on your PC:.

Click the "Start" icon. Go to "Settings > Update & Security settings > Windows Update". You have learned four effective ways to download Windows 10 64/32 bit full version for free.

Create Windows 10 USB with Rufus

You can install Windows 10 on your PC and enjoy its wonderful features.

If you have problems with Windows 10 activation, you can activate Windows 10/11 with a product key/digital license.

To create a Windows 10 USB installer with Rufus, connect a USB flash drive of at least 8GB of space, and then use these steps:

  1. Open the Rufus download page.
  2. Under the "Download" section, click the link to save the latest release on the computer.

    Source: Windows Central

  3. Double-click the Rufus-x.xx.exe file to launch the tool.
  4. Click the Settings button (third button from the left) at the bottom of the page.

    Source: Windows Central

  5. Under the "Settings" section, use the Check for updates drop-down menu and select the Daily option.

    Source: Windows Central

    Quick tip: These steps are necessary to enable the option to use the tool to download the ISO file of Windows 10.

  6. Click the Close button.
  7. Close the Rufus tool.
  8. Relaunch the Rufus tool.
  9. Under the "Device" section, use the drop-down menu to select the USB flash drive.
  10. Under the "Boot selection" section, click the down arrow button on the right and select the Download option.

    Source: Windows Central

    Quick tip: If you already have an ISO file, click the Select button, choose the Windows 10 ISO file, and continue with step 24.

  11. Click the Download button.
  12. Use the "Version" drop-down menu and select the Windows 10 option.
  13. Click the Continue button.
  14. Select the 21H2 (Build 19044.xxx - xxxx.xx) option to download the Windows 10 November 2021 Update.

    Source: Windows Central

  15. Click the Continue button.
  16. Use the "Edition" drop-down menu and select the Windows 10 Home/Pro option.
  17. Click the Continue button.
  18. Use the "Language" drop-down menu and select the installation language.

    Quick tip: In the United States, choose the "English" option, not "English International."

  19. Click the Continue button.
  20. Use the "Architecture" drop-down menu and select the 32-bit or 64-bit (recommended).
  21. Click the Download button.
  22. Select the location to download the ISO file.
  23. Click the Save button.
  24. Use the "Image option" drop-down menu to select the Standard Windows installation option.
  25. Use the "Partition scheme" drop-down menu to select the GPT option.
  26. Use the "Target system" drop-down menu to select the UEFI (non CSM) option.

    Source: Windows Central

    Quick note: If the computer includes a legacy BIOS, select the MBR option for partition scheme and BIOS (or UEFI-CSM) option target system.

  27. Under the "Show Advanced drive properties" section, don't change the default settings.
  28. (Optional) Under the "Volume label" field, enter a descriptive name for the drive — for example, "win10_usb."
  29. Under the "File system" and "Cluster size" sections, don't change the default settings.
  30. Click the Show advanced format options button.
  31. Select the Quick format and Create extended label and icon files options.
  32. Click the Start button.
  33. Click the OK button to confirm.
  34. Click the Close button.

After you complete the steps, Rufus will download the ISO file from the Microsoft servers, and it'll create the bootable media to perform a clean install of Windows 10.

How to perform clean install of Windows 10

The installation process of Windows 10 has two main parts, including the setup and out-of-box experience (OOBE). In the setup process, that's where you will select some of the basic settings, and you'll find the options to erase the hard drive, configure the partitions, and clean install Windows 10. The out-of-box experience happens after the setup is complete, and it's the stage where you'll configure your settings, such as region, network, account, privacy, and other settings.

Windows 10 clean install process

After the preparation, you can proceed with the clean installation of Windows 10.

Warning: This is another friendly reminder that this process will erase everything on the computer. Before proceeding, it's always recommended to make a temporary full backup of your PC.

To do a clean installation of Windows 10, use these steps:

  1. Start the PC with Windows 10 USB media.
  2. On prompt, press any key to boot from the USB flash drive.
  3. On the "Windows Setup," click the Next button.

    Source: Windows Central

    Quick tip: If your language, time and currency, and keyboard are different from the default selections, make sure to select the correct settings.

  4. Click the Install now button.

    Source: Windows Central

  5. On a reinstallation, click the I don't have a product key option to continue (assuming that your device was already activated). Otherwise, if this is your first time installing Windows 10, enter the product key.

    Source: Windows Central

  6. Click the Next button.
  7. Select the edition of Windows 10 (If applicable).

    Source: Windows Central

    Quick note: The selection has to match the edition of your product key. If you don't select the correct edition, Windows 10 won't activate, and you'll have to redo the entire process.

  8. Click the Next button.
  9. Select the I accept the license terms option to continue.
  10. Click the Next button.
  11. Click the Custom: Install Windows only (Advanced) option to continue with a clean installation.

    Source: Windows Central

  12. Select the partition with the current installation (usually "Drive 0") and click the Delete button.

    Quick tip: If "Drive 0" has multiple partitions, you have to select and delete each partition to allow the setup to use the entire hard drive for the new clean installation. The setup will create the required partitions automatically during the process. Also, it's not necessary to delete the partitions on secondary drives.

  13. Click the Yes button.

    Source: Windows Central

  14. Select the empty drive (Drive 0 Unallocated Space).

    Source: Windows Central

  15. Click the Next button.

Once you complete the steps, the setup will install a fresh copy of Windows 10 on the device.

If you plan to decommission the computer, you do not need to continue with the out-of-box experience. If this is an upgrade, continue with the instructions below.

Windows 10 out-of-box experience

After the setup, you have to continue with the out-of-box experience to configure your preferences and create a new account.

To complete the OOBE on Windows 10, use these steps:

  1. Select your Region option.

    Source: Windows Central

  2. Click the Yes button.
  3. Select your keyboard layout option.

    Source: Windows Central

  4. Click the Yes button.
  5. Click the Skip button (unless you need to add a second keyboard layout).

    Quick note: If you don't have a wired network connection, you'll have to sign into the wireless network.

  6. Select the Set up for personal use option.

    Source: Windows Central

  7. Click the Next button.
  8. Confirm your Microsoft account information to create an account.

    Source: Windows Central

    Quick note: The recommended process is to use a Microsoft account. However, if you want to use a traditional local account, you'll need to click the Offline account option from the bottom-left corner and continue with the on-screen directions.

  9. Click the Next button.
  10. Confirm your account password.
  11. Click the Next button.
  12. Click the Create PIN button.

    Source: Windows Central

  13. Create a four-digit Windows Hello PIN.

    Source: Windows Central

    Quick tip: If you want to continue using a traditional password, click the Cancel button to skip the process.

  14. Select the privacy settings for the device (and don't forget to scroll down the page to review all the available settings).
  15. Click the Accept button.

    Source: Windows Central

  16. (Optional) Click the Skip button, or select how you will be using the device to receive targeted ads, tips, and other recommendations and click the Accept button.

    Source: Windows Central

  17. (Optional) Click the No, thanks button to skip the phone link process.

    Source: Windows Central

  18. (Optional) Click the Next button to allow OneDrive to back up the Desktop, Documents, and Pictures folders to the cloud. If you use another cloud service or prefer not to upload files to the cloud, click the Only save files to this PC option in the screen's bottom-left corner.

    Source: Windows Central

  19. Click the Decline button to skip the Microsoft 365 setup (as necessary).

    Source: Windows Central

    Quick tip: If you have an Office product key, you can click the I have a product key option, and then the apps will install automatically.

  20. (Optional) Click the Not now button to continue without setting up Cortana.

    Source: Windows Central

After you complete the steps, the settings will apply to the clean installation of Windows 10, and you should be able to see the default desktop experience.

How to complete setup after installation of Windows 10

Once the installation is complete, it's also good to check that Windows 10 isn't missing any critical updates or drivers and is properly activated.

Install updates

To download and install the latest updates, use these steps:

  1. Open Settings.
  2. Click on Update & Security.
  3. Click on Windows Update.
  4. Click the Check for updates button.

    Source: Windows Central

Once you complete the steps, any available updates will automatically download and install. Also, a restart may be required to complete the update process.

Check missing drivers

To determine whether drivers are missing on Windows 10, use these steps:

  1. Open Start.
  2. Search for Device Manager and click the top result to open the app.
  3. Confirm that none of the devices has a yellow or red mark, and make sure nothing is listed as unknown.

    Source: Windows Central

If some hardware has problems, you may need to manually install the latest drivers from your computer manufacturer's support website. You can use this guide to install device drivers on Windows 10.

Install missing drivers

On Windows 10, drivers can also be part of the optional updates. If the computer doesn't have all the required drivers, you may be able to download them from Windows Update.

To download missing drivers on Windows 10, use these steps:

  1. Open Settings.
  2. Click on Update & Security.
  3. Click on Windows Update.
  4. Click the View optional updates option. If the option isn't available, it means that Windows Update doesn't have any driver updates for the computer.

    Source: Windows Central

  5. Click the Driver updates section.
  6. Select the missing driver.

    Source: Windows Central

  7. Click the Download and install button.

After you complete the steps, Windows Update will download and install the missing drivers automatically.

Confirm activation

To confirm Windows 10 was activated correctly, use these steps:

  1. Open Settings.
  2. Click on Update & Security.
  3. Click on Activation.
  4. If Windows 10 is activated successfully, you will see one of these messages:

    • Windows is activated with a digital license: The installation has been activated, but it isn't linked to your Microsoft account.
    • Windows is activated with a digital license linked to your Microsoft account: The installation has been activated, and the license is linked to your Microsoft account.

    Source: Windows Central

In case Windows 10 didn't activate, the device will try to reactivate at a later time. If you're still having issues after a couple of days, you can use the Activation Troubleshooter to activate.

Reinstall apps

It's now time to reinstall the apps, including your preferred web browser, such as Google Chrome, Mozilla Firefox, or Opera to browse the web.

If you use Spotify or iTunes to listen to tunes while working or surfing the internet, you can download these apps and others from the Microsoft Store.

Also, it's now a good time to download and install the Microsoft Office apps to start working with Word, Excel, and PowerPoint, and managing your emails with Outlook.

Restore files from backup

The last thing left to do is to restore your documents from backup. If you previously configured file backup with OneDrive, the data should already be available inside the OneDrive folder, but if the app didn't configure automatically, you can use this guide.

If you have a backup of your files on an external drive, reconnect the storage to restore the data into the default folders (Documents, Downloads, Pictures, etc.).

To restore files from backup on Windows 10, use these steps:

  1. Open File Explorer.
  2. Under the This PC section in the left pane, select the external drive with the file backup.
  3. Select the folders with the file to restore.
  4. Click the Copy to menu from the "Home" tab.

    Source: Windows Central

  5. Select the Choose location option.
  6. Select the destination to restore the files — for example, the Documents folder.
  7. Click the Copy button.

After you complete the steps, the files will restore to the new location.

Although you can start a clean installation using the Media Creation Tool without a USB media and even the "Reset this PC" option from the recovery settings, these methods have their limitations and do not always work as expected. The bootable media is the alternative if you want the best possible clean installation method.

More Windows resources

For more helpful articles, coverage, and answers to common questions about Windows 10 and Windows 11, visit the following resources:

We may earn a commission for purchases using our links. Learn more.

For the Pro

Razer just announced the ultra-lightweight Viper V2 Pro gaming mouse

Razer just announced the Viper V2 Pro gaming mouse. It builds upon the specs and design of the Viper Ultimate, which received excellent reviews when it launched in 2019.