Windows 7 Boot Repair Tool

Posted on  by admin

Repair Options:. Do a System Restore in Safe Mode.

How to Repair Windows 7 Using the Startup Repair Tool

"How to Do a System Restore in Windows 7":. "Advanced startup options (including safe mode)". "The Advanced Boot Options screen lets you start Windows in advanced troubleshooting modes. You can access the menu by turning on your computer and pressing the F8 key before Windows starts (Tap F8 at the rate of about once per second)".

  • If that does not fix it, follow this method:.

  • Make your own System Repair Disk from the information in this Tutorial:.

  • "How to Create a Windows 7 System Repair Disc".

  • "This will show you how to create a Windows 7 system repair disc to be able to use to boot to system recovery options to help recover your Windows 7 installation if you don't have a Windows installation disc, can't find your Windows installation disc, or can't access the recovery options provided by your computer manufacturer.

  • A system repair disc is not able to install Windows 7.

If you are unable to boot your Windows 7 to create a Windows 7 System Repair Disc, then you could create it on another computer to use on your computer."

Then use that Disk for the System Recovery Options:. "System Recovery Options". "How to Run a Startup Repair in Windows 7".

Reinstall Options:. You do not say if Windows 7 came preinstalled (Dell, HP, etc.) or you bought your own Retail License. If preinstalled, you can contact your Laptop/Computer Manufacturer and ask them to send you a set of Recovery Disks.

They should do that for a small cost, IF they still have them available. And if you never received a Recovery Disk when you received your Laptop/computer there should be a Recovery Partition on the Hard Drive to reinstall Windows back to how it was when new.

Here are the Key/s to press at Boot to start the Recovery Process back to Factory Settings (new condition). Under each Manufacturer in the list below are the instructions in the respective links for you to follow on how to use their Recovery Partition.

Conclusion

Acer – Press Left Alt + F10 Keys. Advent – Tap F10 until Starting System Recovery appears. Asus – Press F9. Dell – Press F8 which will bring up Advanced Boot Optionshttp://www.dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=DSN_362066.

eMachines: Press Left Alt Key + F10. Fujitsu – Press F8. Gateway: Press Alt + F10 Keys - As Acer owns them: press Left Alt + F10 Keys as per Acer eRecovery. HP – Press F11 repeatedly.

Lenovo – Press F11. Packard Bell: Press and hold the ALT key while pressing repeatedly the F10 key.

Release the keys when a message displays that Windows is loading files.

Samsung – Press F4. Sony Vaio – Tap F10 until the Edit Boot Options screen is displayed.

Toshiba – Press 0 (zero). Or you can also borrow the exact same Retail Windows 7 Edition DVD and use your Product Key to reinstall. Or you can use this for preinstalled or Retail Licenses. Download the correct ISO file and make your own disk and use the Product Key that is on the COA Sticker.

And here are instructions on how to burn ISO images to disk:. Then do a clean install:.

The COA sticker is either on the underside of the Laptop or in the Battery Compartment. With a Desktop it is either on the side, rear or top of the Computer Case. Using the downloaded ISO file Method may require phone Activation.

If it does require phone Activation, do not follow the Auto Prompts, but hold on for a real person to explain to as to what has been done for re-installation purposes.

Create Windows 7 Repair tool to Troubleshoot Windows 7

"How to Activate Windows 7 by Phone". The above method also will require you to go to your Computer Manufacturer's website > Support and Downloads Section > locate your Model Number and Operating System > then download and install the latest Drivers for it.

Using the USB method in conjunction with the above Windows 7 download:. "How to Get and Use the Windows 7 USB/DVD Download Tool". Boot from the Windows 7 DVD. Fill in the Language to install, Time and currency format, and Keyboard or input method. Select Repair your computer.

In the screen, choose the Windows 7 installation you want to repair. Choose Startup Repair. Follow any prompts and accept any suggested changes. Choose Finish to restart Windows 7.

This article explains how to repair Windows 7 using the Startup Repair Tool after booting from the Windows 7 DVD. If you don't have a physical DVD, you can create a Windows 7 System Repair Disc. As of January 2020, Microsoft is no longer supporting Windows 7.

Choose the Startup Repair Recovery Tool

We recommend upgrading to Windows 10 to continue receiving security updates and technical support.

  • The Startup Repair tool repairs Windows 7 by replacing important operating system files that might be damaged or missing.
  • Startup Repair is an easy diagnostic and repair tool to use when Windows 7 fails to start properly and you can't use Safe Mode.
  • Not using Windows 7?
  • Every modern Windows operating system has a similar operating system file repair process.
  • To begin the Windows 7 Startup Repair process, you'll need to boot from the Windows 7 DVD.

Watch for a Press any key to boot from CD or DVD.. message similar to the one shown in the screenshot above.Press any key to force the computer to boot from the Windows 7 DVD.If you don't press a key, your PC will try to boot to the operating system that's currently installed on your hard drive. If this happens, just restart your computer and try to boot to the Windows 7 DVD again. Press any key to force the computer to boot from the Windows 7 DVD.If you don't press a key, your PC will try to boot to the operating system that's currently installed on your hard drive. If this happens, just restart your computer and try to boot to the Windows 7 DVD again.

If you want the Startup Repair to work properly, you must remove any flash drives or other USB storage devices, like external hard drives, from your computer before continuing.

Choose 'Finish' to Restart to Windows 7

Due to the way some computers report the storage space on USB connected drives, the Windows 7 Startup Repair may incorrectly report that it found no problems when in fact there may actually be an issue.

No user intervention is required here. Just wait for the Windows 7 setup process to load files in preparation for whatever task you might want to complete.

  • In our case, it's a Startup Repair, but there are lots of tasks that could be completed with the Windows 7 DVD.

  • No changes are being made to your computer during this step.

  • Windows 7 is only temporarily "loading files."

  • Choose the Language to install, Time and currency format, and Keyboard or input method that you'd like to use in Windows 7.

  • Click Repair your computer on the bottom-left of the Install Windows window.

  • This will begin the Windows 7 System Recovery Options which contains several useful diagnostic and repair tools, one of which is Startup Repair.

  • Do not select Install now.

If you already have Windows 7 installed, this option is used to perform a Clean Install of Windows 7 or a Parallel Install of Windows 7. System Recovery Options, the set of tools that contains Startup Repair, will now search your hard drive(s) for any Windows 7 installations.

You don't need to do anything here but wait. This Windows installation search shouldn't take more than a few minutes at most.

Use Advanced Boot Options to Launch Startup Repair in Windows 7

Choose the Windows 7 installation that you'd like to perform the Startup Repair on. Don't worry if the drive letter in the Location column doesn't match the drive letter that you know Windows 7 is installed on in your PC.

Drive letters are somewhat dynamic, especially when using diagnostic tools like System Recovery Options.

For example, as you can see above, this Windows 7 installation is listed as being on drive D: when it's actually the C: drive when Windows 7 is running. Click Startup Repair from the list of recovery tools in System Recovery Options.

As you can see, several other diagnostic and recovery tools are available in the Windows 7 System Recovery Options including System Restore, System Image Recovery, Windows Memory Diagnostic, and Command Prompt.

In this guide, however, we're only repairing operating system files using the Startup Repair tool.

The Startup Repair tool will now search for problems with files that are important to the proper functioning of Windows 7.

Easier Way to repair Windows 7 without CD

If the Windows 7 repair tool finds a problem with an important operating system file, the tool might suggest a solution of some kind that you have to confirm, or it might solve the problem automatically.

  • Whatever happens, follow the prompts as necessary and accept any changes suggested by Startup Repair.

  • Startup Repair will now attempt to repair whatever problems it found with Windows 7 files.

  • No user intervention is required during this step.

  • Your computer may or may not restart several times during this repair process.

  • Do not boot from the Windows 7 DVD on any restart.

  • If you do, you'll need to restart the computer immediately so the Startup Repair process can continue normally.

You won't see this step if Startup Repair didn't find any problems with Windows 7.

Select Finish once you see the Restart your computer to complete the repairs window to restart your PC and start Windows 7 normally.

Wait for Windows 7 to Load Files

It's possible that Startup Repair didn't fix whatever problem you were having. If the Startup Repair tool determines this itself, it might automatically run again after your computer restarts.

If it doesn't automatically run but you're still seeing problems with Windows 7, repeat these steps to run Startup Repair again manually.

Wait While Startup Repair Searches for Problems With Windows 7 Files

Also, be sure to read the Important note on Step 1. If it becomes apparent that Startup Repair isn't going to solve your Windows 7 problem, you do have some additional recovery options including a System Restore or a System Image Recovery, assuming you have previously backed up your entire computer.

  • You could also try a Parallel Install of Windows 7 or a Clean Install of Windows 7.
  • However, if you've tried a Startup Repair of Windows 7 as part of another troubleshooting guide, you're probably best served by continuing with whatever specific advice that guide is giving as your next step.
  • Content of this article:. When your Windows 7 computer won’t boot or has issues starting up, it will run Startup Repair automatically and try to fix the problem. You will see the Windows Error Recovery screen as the picture shown below.
  • You can choose “Launch Startup Repair (recommended)” to run Startup Repair.

However, because of various reasons, you may meet Windows 7 Startup Repair loop problem without loading the normal Windows. Or it doesn’t show you the Windows Error Recovery screen.

In this case, it seems that you will need the Windows 7 installation CD to launch the Startup Repair yourself. But the problem is that you don't have the installation disc at hand. So is it possible to repair Windows 7 without CD?

Well, the answer is Yes. Keep reading to learn how to launch Startup Repair in Windows 7 without CD. If your computer doesn’t show you the Windows Error Recovery screen, you can make it manually by the following steps.

Turn on your computer. Press and hold the F8 key. Then you will see the Advanced Boot Options screen. Here you can choose Repair Your Computer to run Startup Repair.

Sometimes, the Startup Repair option may not be available and you will be asked to use a Windows installation disc to repair your computer. In this case, you can choose to create Windows 7 recovery USB to repiar Windows 7 computer. To create Windows 7 repair tool, you need three items, ISO image file, USB flash drive(at least 4GB) and Windows 7 USB/DVD Download Tool.

How do I repair Windows 7 withou CD?

Please prepare them and then follow steps below. Plug your USB flash drive into Windows 7 computer and be sure it can be detected. Then, run Windows 7 USB DVD Download Tool, click “Browse" to choose the ISO file.

In the following picture, you will ask to choose media type. Select USB device rather than DVD. Select your USB drive from the drop-down menu and click Begin Copying to start the media creation process. Please remember to backup important files on it first, because this drive will be formatted finally.