Windows 7 Installation Media Download

Posted on  by admin

Support for Windows 7 ended on January 14, 2020. We recommend you move to a Windows 11 PC to continue to receive security updates from Microsoft. The recommended (and easiest) way to get SP1 is to turn on automatic updating in Windows Update in Control Panel and wait for Windows 7 to notify you that SP1 is ready to install.

It takes about 30 minutes to install, and you'll need to restart your computer about halfway through the installation. To check if Windows 7 SP1 is already installed on your PC, select the Start button, right-click Computer, and then select Properties.

If Service Pack 1 is listed under Windows edition, SP1 is already installed on your PC. You’ll need to know if your PC is running a 32-bit (x86) or 64-bit (x64) version of Windows 7. Select the Start button, right-click Computer, and then select Properties. The version of Windows 7 is displayed next to System type.

Windows 7 download ISO with SP1

Check to make sure your PC has enough free disk space to install SP1. Installation method. Estimated amount of free disk space needed. x86-based (32-bit): 750 MB. x64-based (64-bit): 1050 MB. Downloading SP1 from the Microsoft website. x86-based (32-bit): 4100 MB.

x64-based (64-bit): 7400 MB. It’s a good idea to back up your important files, photos, and videos to an external hard disk, USB flash drive, or the cloud before installing the update.

Make sure your PC is plugged in to power and you’re connected to the Internet. Some antivirus software might prevent SP1 from installing or slow down the installation. You can temporarily disable your antivirus software before the installation. If you do so, make sure you’re aware of the risks that might be involved and re-enable the antivirus software as soon as SP1 is done installing. If your PC is set to automatically install updates, you’ll be prompted by Windows Update to install SP1. Follow the instructions to install the update. To manually install SP1 from Windows Update:.

Select the Start button > All programs > Windows Update.

In the left pane, select Check for updates. If any important updates are found, select the link to view available updates. In the list of updates, select Service Pack for Microsoft Windows (KB976932) and then select OK. Note: If SP1 isn’t listed, you might need to install some other updates before installing SP1. Install any important updates and then follow these steps again to check for SP1.

Select Install updates. You might be asked for an admin password or to confirm your choice. Follow the instructions to install SP1. After SP1 is installed, sign in to your PC. You might see a notification indicating whether the update was successful. If you disabled your antivirus software before the installation, make sure you turn it back on.

If you’re unable to install SP1 from Windows Update, you can download the installation package from the Microsoft Download Center and then install SP1 manually. Go to the Windows 7 Service Pack 1 download page on the Microsoft website.

Select Install Instructions to see which packages are available for download, and make note of the one that you need. Select the appropriate language from the drop-down list, and then select Download. Select the packages you need to install, select Next, and then follow the instructions to install SP1. Your PC might restart a few times during the installation. After SP1 is installed, sign in to your PC. You might see a notification indicating whether the update was successful.

If you disabled your antivirus software before the installation, make sure you turn it back on. If you try to install SP1 and see an error message that the installation wasn’t successful, this might be because there’s a problem with the Windows Servicing Store that is used to install updates or because your antivirus software is preventing the update from being installed.

To try and fix the problem, follow these steps and then try to install SP1 again. Select the link in the table that corresponds with the version of Windows running on your PC. Windows version. Link to Microsoft Download Center. Windows 7 32-bit (x86). Windows 7 64-bit (x64). On the Microsoft Download Center page, select your language and then select Download. It might take a few minutes for the tool to download and install.

To install the tool immediately, select Open or Run and then follow the instructions.

To use the tool later, select Save and download the installation files to your PC. On the Windows Update Standalone Installer screen, select Yes or OK.

On the Installation complete screen, select Close. Try installing the service pack again. If your PC isn’t able to find or install updates, the Windows Update troubleshooter might be able to fix the problem. Select the Start button, and then select Control Panel.

In the search box, enter troubleshooter and then select Troubleshooting from the list of results.

Under System and Security, select Fix problems with Windows Update and then follow the instructions. After the troubleshooter is done, try installing the service pack again. Click on either the 32-bit or 64-bit download link. (If you are unsure, select the 64-bit link.) .

FAQs about Windows 7 ISO Download

Update, 4/20/22: Microsoft no longer offers Windows 7 ISO files for download. The page where you could download these files now contains information about how support has ended for Windows 7. We recommend downloading a modern version of Windows that’s still getting security updates. We do not recommend downloading a Windows 7 ISO from a non-Microsoft source, as third-party downloads may contain malware. Exercise extreme caution if you do so.

Click on 'Download through your browser' and take note where the Windows.iso setup file was saved. Use the Windows 7 Media Tool.. Windows 7 usb / cd/dvd boot media toolWindows 7 USB / CD/DVD Media Tool[OR https://www.microsoft.com/en-us/software-download/windows7 ].

Install the Windows USB/DVD Media Tool (that you just downloaded). Open/Run up the Media Creation Tool (that you just installed) [and click run].

Browse to the location of the ['windows.iso'] file / where the downloaded file was saved (see step 2 above).

Select 'DVD' OR 'USB'..

If you selected ISO: Insert a disc when the application asks.If you selected USB: Have the USB inserted in the computer.(Warning! This will destroy/wipe all data existing on the USB device!). USB / CD/DVD BIOS Boot Order (To enforce boot from preferred media). You may need to change your system BIOS to start from the boot media (that you created).

Start your computer to Enter your computer's BIOS.(When the BIOS screen appears or you are prompted to do so, press Del, Esc, F2, F10, or F9 (depending on your computer’s motherboard) to enter the system BIOS. The key to enter the BIOS is usually shown on the screen.).

Find your BIOS's Boot Options menu. Select the appropriate Boot Media Device (CD/DVD-ROM drive OR USB) as the first boot device of your computer.

Save the changes of the settings. Shut off your computer. Insert the CD/DVD / USB boot media. Start your computer to boot from the CD/DVD/USB. Insert the USB or CD/DVD Windows Installation Setup boot media. Power on the computer to start the Windows Installation Setup process. Watch for a message about pressing a key to boot from the device. Press a key to force the computer to start from the Windows Installation Setup boot media.(When the computer starts, press a key, if you are asked if you would like to start from the Windows Installation Setup boot media by pressing any key.).

Download Windows 7 ISO Files from AdGuard

Once Windows Setup loads, you should be presented with a Windows Setup window..Choose your Windows Setup options / Select your Regional Settings(preferred language, keyboard type, and time/currency format), then click Next. Click the 'Install' Now button. Accept the License Terms. Read over the Microsoft Software License Terms, check 'I accept the license terms', and click Next. Select the Custominstallation. Decide which hard drive and partition you want to install Windows on ORDelete All Partitions, so Windows Install will take over install the Windows OS onto the hard drive you select.Warning!!!

Deleting partitions will delete/destroy all data(software, applications and files!) on the partitions that you delete..which may result in destroying valuable data! Install Windows on your preferred hard drive / partition.

, select it and click Next. Windows will begin installing. After installation has completed, remove the Windows Install Media and click Finish. (When you restart your computer, it should run your new Windows Operating System.). You can use installation media (a USB flash drive or DVD) to install a new copy of Windows, perform a clean installation, or reinstall Windows.

To create installation media, go to the software download website, where you'll find step-by-step instructions.

On that website, you can select a version of Windows and create your own installation media using either a USB flash drive or a DVD.

To go directly to one of the versions, select one of these links:. Windows 10 (Then select Download tool now.). Windows 11 (Then select Download tool now.).

Important: Back up your files before you install or reinstall Windows on your PC. Learn how for Windows 10 and Windows 11 or for Windows 7 and Windows 8.1. To create the installation media, here's what you'll need:. A PC with a reliable internet connection. The download time will vary, depending on your internet connection. A USB flash drive, external hard drive, or DVD. A blank USB flash drive or external hard drive with at least 8 GB of space, or a blank DVD (and DVD burner).

We recommend using a blank USB or blank DVD because any content on it will be deleted. When burning a DVD from an ISO file, if you're told the disc image file is too large, you'll need to use dual layer (DL) DVD media. Your 25-character product key (not required for digital licenses).

For help finding it, go to Find your Windows product key. After you've created the installation media, you can reset or reinstall Windows. To learn more, go to Recovery options in Windows. A Windows 7 Installation DVD or USB are very useful for repairing computers. I wanted to show you guys how to create your own Windows 7 installation disc with DVD or USB flash drive with the help of Windows USB/DVD Download Tool.

Image Credit: bfishadow on Flickr

If you want to create a Windows 10/8 installation media, read this tutorial. Firstly, you need to do the following tips. Backup the data of your DVD or USB flash drive because it will be erased. Go to Microsoft website and download the Windows USB/DVD Download Tool:. Go to Microsoft site and download the Windows 7 ISO Image (It requires your Windows 7 product key to download):. If you want to make a Windows 7 installation DVD, make sure that there is a DVD-ROM in your computer.