Windows 7 Update

Posted on  by admin

Step 3: Download and install the Convenience Rollup

Windows 7 reigned supreme as Microsoft’s premier computer Operating System for a good few years before it was succeeded by Windows 8. Since that is the case, when a Windows user installs Windows 7 on a computer from scratch in today’s day and age, they have the painstaking task of downloading and installing years’ worth of updates for Windows 7, with the computer constantly rebooting, ahead of them.

Step 2: Download and install the April 2015 “Servicing Stack” update

Over the years, Microsoft has released hundreds of updates for Windows 7, almost all of which are extremely important, which is why it is crucial for any user who installs Windows 7 Service Pack 1 from scratch on a computer to download and install each of these updates.

Thankfully, Microsoft understands just how time-consuming and tedious a task downloading all available updates for a fresh installation of Windows 7 can be, which is why the tech giant has released the “Windows 7 SP1 Convenience Rollup”.

The Convenience Rollup allows Windows 7 users too, with the download and installation of only one update package install every single update released for Windows 7 between February 2011 and the 16th of May, 2016.

The Rollup essentially functions as Windows 7 Service Pack 2. Unfortunately, Microsoft has not made the Convenience Rollup available through Windows Update, meaning that any user who installs Windows 7 on a computer will have to go out of their way to download and install the Convenience Rollup.

How to obtain this update

If a user does not opt for the Convenience Rollup, the only alternative for them is to allow Windows Update to download and install all available updates one by one – an aggravatingly slow process. If you want to install the Convenience Rollup, you are first going to have to make sure that you have Windows 7 Service Pack 1 installed as the Rollup can only be installed on computers running on Windows 7 Service Pack 1.

Once that’s out of the way, you can move on to actually downloading and installing the Windows 7 Service Pack 1 Convenience Rollup.

Open the Start Menu. Right-click on Computer, and click on Properties in the resulting context menu.

See whether the System type: field under System says 32-bit Operating System or 64-bit Operating System.

In April 2015, Microsoft rolled out a “Servicing Stack” update for the Windows 7 Operating System. For reasons not yet revealed by Microsoft, you have to download and install this update before you can actually install the Convenience Rollup.

Click here to be taken to the official download page of the April 2015 Servicing Stack update, and scroll down to Method 2: Microsoft Download Center.

If you are using a 32-bit version of Windows 7, click on Download the package now in front of All supported x86-based versions of Windows 7.

If you are using a 64-bit version of Windows 7, click on Download the package now in front of All supported x64-based versions of Windows 7. On the next page, click on the “Download” link to initiate the download.

Wait for the update package to be downloaded. Once the update package has been successfully downloaded, navigate to the location it was downloaded to, double-click on the downloaded file to run it and go through the wizard to install the update.

Click here to download the 32-bit version of the Convenience Rollup, or here to download the 64-bit version of the Convenience Rollup.

Wait for the Convenience Rollup package to be downloaded. Once the file has been downloaded, navigate to where you saved the file, locate it and double-click on it to run it.

Go through the wizard to install the Convenience Rollup on your computer, and with it, the majority of the updates ever rolled out for the Windows 7 Operating System.Note: Sometimes the update might take long to install.

Note: As stated before, the Windows 7 Service Pack 1 Convenience Rollup only consists of the updates for Windows 7 released between February 2011 and the 16th of May, 2016.

Microsoft has released a few updates for Windows 7 computers after the 16th of May, 2016, and you are going to have to manually install these updates through Windows Update after you have installed the Convenience Rollup.

Microsoft has also promised a single large update for Windows 7 computers with bug fixes and stability improvements every month, as well as a few updates for security problems and patch deployments every now and then, so be on the lookout and check for updates in Windows Update often.

If you have any issues while downloading the update consult our Windows 7 updates not downloading post.

Update detail information

This article describes an update that enables you to upgrade your computer from Windows 7 Service Pack 1 (SP1) to a later version of Windows. This update has prerequisites. Important Do not install a language pack after you install this update.

If you do, the language-specific changes in the update will not be applied, and you will have to reinstall the update.

For more information, see Add language packs to Windows. This update is available from Windows Update.

The following files are available for download from the Microsoft Download Center.

Operating system. All supported x86-based versions of Windows 7. All supported x64-based versions of Windows 7.

All supported x64-based versions of Windows Server 2008 R2. All supported IA-64-based versions of Windows Server 2008 R2. Note This update for Windows Server 2008 R2 does not support you to upgrade to a later version of Windows For more information about how to download Microsoft support files, click the following article number to view the article in the Microsoft Knowledge Base:.

Step 1: Find out whether you are using a 32-bit or 64-bit version of Windows 7

119591 How to obtain Microsoft support files from online services Microsoft scanned this file for viruses. Microsoft used the most current virus-detection software that was available on the date that the file was posted.

The file is stored on security-enhanced servers that help prevent any unauthorized changes to the file.

To install this update, you must install Service Pack 1 for Windows 7 or Windows Server 2008 R2. To apply this update, you do not have to make any changes to the registry.

You may have to restart the computer after you apply this update. This update does not replace a previously released update.

Registry information

The global version of this update installs files that have the attributes that are listed in the following tables. The dates and the times for these files are listed in Coordinated Universal Time (UTC). The dates and the times for these files on your local computer are displayed in your local time together with your current daylight saving time (DST) bias.

Additionally, the dates and the times may change when you perform certain operations on the files.

Windows 7 and Windows Server 2008 R2 file information and notes. The MANIFEST files (.manifest) and the MUM files (.mum) that are installed for each environment are listed separately in the "Additional file information" section.

MUM, MANIFEST, and the associated security catalog (.cat) files, are very important to maintain the state of the updated components.

The security catalog files, for which the attributes are not listed, are signed with a Microsoft digital signature.

For all supported x86-based versions of Windows 7. For all supported x64-based versions of Windows 7 or Windows Server 2008 R2.

For all supported IA-64-based versions of Windows Server 2008 R2. Additional file information. Additional file information for Windows 7 and for Windows Server 2008 R2.

Additional files for all supported x86-based versions of Windows 7. Additional files for all supported x64-based versions of Windows 7 and of Windows Server 2008 R2.

Additional files for all supported IA-64-based versions of Windows Server 2008 R2.

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

See the terminology that Microsoft uses to describe software updates.

Method 2: Microsoft Download Center

Some services may interfere with the updating process, so the Windows 7 Windows updates not downloading error may occur. In this case, you can try to update during clean boot. In clean boot, there are no unnecessary services for the system to work.

Here is a guide on how to do a clean boot in Windows 7.

Step 1: Press the Win key + R key on your keyboard to open the Run dialog box.

Step 2: Next, type msconfig and press Enter to open the System Configuration window.

Step 3: Now, switch to the Services tab.

Step 4: Check Hide all Microsoft services and then click Disable all.

Step 5: Switch to the Startup tab and click Disable all.

Step 6: Finally, click OK and then restart your PC.

After the restart, you are in clean boot. Now you should run the updating process successfully. After you install the updates successfully, you can exit the clean boot mode and then you can continue to use your PC normally.

If you want to do a clean boot in Windows 10, you can refer to this post: How to Clean Boot Windows 10 and Why You Need to Do So?

Prerequisites

Sometimes, Windows Firewall causes the Windows updates not downloading Windows 7 issue. Hence, the only thing you need to do to fix this issue is to turn off your Windows Firewall.

Here are the instructions on how to do that.

Step 1: Firstly, press the Win key + R key, type Control Panel in the Search bar and press Enter.

Step 2: Choose View by: Small icons and click the Windows Firewall option.

Step 3: In the new window, click Turn Windows Firewall on or off on the left side.

Step 4: Now, check Turn off Windows Firewall (not recommended) next to both Home or work (private) network location settings and Public network location settings. Finally, click OK.

After that, you should disable Windows Firewall successfully. Then, you can check if the issue is solved.

Restart requirement

Installing the updates automatically without warning may help you to fix the Windows 7 updates not downloading issue. The process can slow down your computer and this solution may not be suitable for all of you. However, changing the settings like this may help you solve this error in particular. Thus, you can try.

Step 1: Firstly, press the Win key + R key, type Control Panel in the Search bar and press Enter.

Step 2: Choose View by: Small icons and click the Windows Update option.

Step 3: Click Change settings. Under the Important updates section, choose Install updates automatically (recommended) and choose how often and when do you want to install updates. At last, click OK.

After that, the problem should be solved and the update should proceed to download.

These are all the solutions for the Windows 7 updates not downloading issue. Hope they can be helpful to you. For more suggestions, feel free to watch this video guide:

Troubled by the issue Windows Updates cannot currently check for updates? This post shows 4 solutions to fix Windows update failed problem.

Update replacement information

  1. Select a Backup Mode
  2. Choose Backup Source
  3. Choose a Destination Path to Store Your System Image
  4. Start to Back up

Method 1: Windows Update

After you try the methods mentioned above, you should fix the issue now. Right now, here is a useful suggestion for you to protect your PC: create a system image. If you encounter some system problems in the feature, you can restore your PC to the previous normal state with the system image created before.

You can refer to this post to restore your computer: How to Restore Computer to Earlier Date in Windows 10/8/7 (2 Ways).

Thus, how to create a system image? The professional backup software - MiniTool ShadowMaker is highly recommended. It provides you with a one-click system backup solution. With it, you can also back up your files, folders, disks, and partition. It is compatible with Windows 7/8/10.

Its functionality is more than this. If you have a need, just get MiniTool ShadowMaker Trial to have a try or you can purchase its Pro Edition to use it permanently.

Now, the following part will show how to back up your system on Windows 7.

Step 1: Select a Backup Mode

1.Launch MiniTool ShadowMaker and Click Keep Trial to keep using the Trial Edition.

2.In the popup window, click Connect in This Computer to manage your local computer.

Step 2: Choose Backup Source

MiniTool ShadowMaker is designed to back up the operating system by default. You can see that the system reserved partition and C drive are already selected, so there is no need to choose them again.

Step 3: Choose a Destination Path to Store Your System Image

1.Click the Destination tab in the Backup page.

2.Choose a suitable destination path and then click OK. You can back up your system to an external hard drive, USB flash drive, NAS and more.

Step 4: Start to Back up

1.There are two available options for you: click Back up Now to create a backup image right now or click Back up Later to delay this process.

2.A confirmation window will pop up. Just click Yes to confirm your operation.

In addition to creating the system image with the Backup feature of MiniTool ShadowMaker, you can also protect your PC using another feature of MiniTool ShadowMaker - Clone Disk. Refer to this post: The Best Alternative to Acronis Clone Software: MiniTool ShadowMaker.

Conclusion

To sum up, the Windows 7 updates not downloading issue should be solved by using the methods mentioned above and now you can update your Windows 7 normally. In addition, you should manage to create a system image with this powerful backup program - MiniTool ShadowMaker.

If you are having some trouble with MiniTool ShadowMaker, please don’t hesitate to contact us by sending an email to [email protected].

Windows 7 Updates Not Downloading FAQ

Microsoft ended mainstream support for Windows 7 in 2015, but the operating system remains covered by extended support until January 14, 2020. At this stage, Windows 7 will no longer receive new features through updates, but Microsoft will still issue security patches regularly. In another year, that will be over, too.
Of course, you can upgrade Windows 7 to Windows 10. Microsoft will pitch help for Windows 7-to-Windows 10 upgraders with its program FastTrack. With FastTrack, you can do that job.
If a version of Windows is stopped by Microsoft, the security updates for that operating system like Windows Vista and Windows XP will no longer receive security updates. Hence, the same will be true for Windows 7 on January 14, 2020.
While Windows 10 has many new features, Windows 7 still offers better application compatibility. While Photoshop, Google Chrome, and other popular applications still run on Windows 10 and Windows 7, some older third-party software works better on older operating systems.